wft-13-15 — FERMAT model

WFT 13/15 (R,L)

Series · WFT 13/15
  • T20 table, 20 000 kg — Rotary table for 20 000 kg travelling up to 12 000 mm/min in X, with optional automatic pallet changer for two pallets up to 15 t.
  • Ø 130/150 mm spindle, 800 mm stroke — Live spindle on LM guideways up to 3 400 rpm (4 000 optional) with a replaceable spindle nose; the R version adds a 700 mm ram stroke in the V axis, the L version linear guideways.
  • Continuous 0.001° 5-axis heads — UHA 0.001 and UHAmi SDHS reach angles a Hirth-coupled head cannot hit exactly — no residual tension in head or tool.
  • Up to 189 tool positions — ATC for 20–120 tools exchanging into spindle or head, or a robot changer for 96, 125 or 189 tools at any head position.

Overview

The WFT 13 is FERMAT’s heavy table-type horizontal boring and milling machine for workpieces up to 20 tonnes, heavier than most machine tools handle. The R version adds a 700 mm ram stroke in the V axis for extra reach; the L version runs on linear guideways instead of box ways. Rigidity comes from grey cast-iron castings annealed before machining; productivity comes from pallet changing, tool magazines to 189 positions, and continuously positioned 5-axis heads for angles an indexed head cannot hit exactly. Every main component is designed and manufactured by FERMAT in-house.

Explore WFT 13/15 (R,L)

Full technical specifications. Toggle between metric and imperial units.

WFT 13/15 (R,L) technical specifications
Parameter Units WFT 13 (Ø 130)WFT 15 (Ø 150)
Spindle diameter mm 130150
Spindle taper — SK 50 (DIN, MAS 45°, ANSI)/BIG+/HSK100
Spindle speed (max.) rpm V130 – 3400 (opt. 4000)V150 – 3000 (opt. 3500)
Main Power Heidenhain or SIEMENS CNC (S1/S6) kW 41/61.5; 53/77.9
Max. Torque Heidenhain or SIEMENS CNC (S1/S6) Nm 2099/3149; 2713/3989
Main Power FANUC CNC (S1/S3) kW 37/45; 53/62
Max. Torque FANUC CNC (S1/S3) Nm 2210/2687; 2713/3989
X-axis Cross Travel of Table mm 2000/3000/4000/5000/6000 (25–50T: 1200 – 7200, step 600)
Y-axis Vertical Travel of Headstock mm 2000/2500/3000/3500
Z-axis Longitudinal Travel of Column mm 1500/2000/2500/3000
W-axis Spindle Travel mm 800
Ram stroke in V-axis (optional) mm 700 (for WFT R)
Rapid Feed X, Y mm/min 12000, 12000 (box GW); 12000, 12000 (Lin. GW Standard); 20000, 25000 (Lin. GW Exclusive)
Rapid Feed Z, W mm/min 8500, 10000 (box GW); 8500, 10000 (Lin. GW Standard); 25000, 10000 (Lin. GW Exclusive)
Rapid Feed V mm/min 10000
Rapid Feed B rpm 2 (opt. 5)
Max. Table Load kg 20000 (opt. 10000, 25000, 50000)
Table Size — T20 mm 1600×1800 / 1800×2200 / 1800×2600 / 2000×2400 / 2500×2500 / 2000×3000
Table Size — T25–50 mm 2000×2000 / 2000×2500 / 2000×3000 / 2500×2500 / 2500×3000 / 2500×3500 / 3000×3000 / 3000×3500 / 3500×3500 / 2500×5000
Table Size — T10 mm 1200×1200 / 1200×1400 / 1400×1600 / 1600×1600 / 1400×1800 / 1600×1800

Customize WFT 13/15 (R,L)

Pick a category to see compatible accessories. Click any accessory to open its detail window.

Angle Heads & Facing Heads

Manual or automatic angle heads and facing heads for extended machining capability — UHAmi, UHA, PHA, PHAmi, OHA series and more.

Showing 10 of 10

Technology & Software

Smart technologies, control platforms and multitasking capabilities available on this machine. Click any item for details and the full list of compatible machines.

Downloads

Technical drawings, catalogues, and certificates for WFT 13/15 (R,L).

WFT 13/15 (R,L) FAQ

Procurement and engineering questions we hear about this model.

How big a workpiece can the WFT 13 take?

The T20 rotary table is rated for 20 000 kg, with plates from 1 600 × 1 800 mm to 2 000 × 3 000 mm; 10 000, 25 000 and 50 000 kg tables are optional. Travels are 2 000 / 3 000 / 4 000 / 5 000 mm in X, 2 000 to 3 500 mm in Y and 1 500 to 3 000 mm in Z. The table travels at up to 12 000 mm/min in X.

What spindle is fitted to the WFT 13?

A 130 or 150 mm boring spindle with SK 50 (DIN, MAS 45°, ANSI), BIG+ or HSK 100 taper. The Ø 130 spindle runs to 3 400 rpm (4 000 optional), the Ø 150 to 3 000 rpm (3 500 optional). Live-spindle stroke in the W axis is 800 mm; a 250 mm support sleeve is a standard accessory for long extensions.

Why is the boring spindle belt-driven rather than direct-driven?

The main motor drives a two-stage gearbox and a three-belt transmission to the pulley of the main seating. The belts act as a mechanical fuse: in a crash they break first, so the main motor is not damaged. Spindle position (S axis) and speed are then measured directly on the spindle by an incremental magnetic rotary sensor rather than at the motor, so no gearbox or belt play enters the position feedback.

How is the 800 mm spindle stroke driven and measured?

A servomotor transmits motion to a ball screw by belt, and the live-spindle nut runs on LM guideways. Draw-out position in the W axis is measured indirectly by the incremental rotary sensor in the servomotor; direct linear measurement is available as an option where the application needs it.

Why is the replaceable spindle nose useful?

The spindle nose takes the repeated stress of tool clamping and unclamping, so it wears before the rest of the spindle. Because it can be exchanged in a relatively short time, geometric machining accuracy can be restored without a major spindle rebuild.

What is the machine structure made of?

Column, column carriage and beds are grey cast-iron castings, annealed before machining — the process that gives them their rigidity and dimensional stability. The column carriage travels along the Z-axis bed on box guideways, and the Y-axis ball screw carries a 24 V electric brake at the top to hold the headstock. On the 5 000 mm X axis a ball-screw support device keeps the screw vibration-free at rapid speeds. Pneumatic valves blow out the spindle taper and bearings through a filtered air system, while hydraulic valves control head clamping, tool release and head functions.

How does the machine hold accuracy as it warms up?

Three measures work together. Gearbox oil circulates through an automatic air/oil cooler; four temperature sensors monitor the headstock and prevent the bearings from overheating; and an active compensation algorithm corrects spindle length dilation in the Z axis automatically, from empirical values held in a compensation table. Heat sources are both external — shop-floor air, the tool heating up — and internal, in the main and axial mounting bearings and the hollow-spindle drive.

What advantage do the 0.001° universal heads have over a Hirth head?

The UHA 0.001 and UHAmi SDHS heads are positioned continuously by 2 × 2 servomotors in a master–slave system rather than indexed on a Hirth coupling. That lets them reach an exact "impossible angle" — for example 30° in the Y axis, which needs C −74.46° and A +137.06°. A Hirth head can only approximate it, which leaves tension in both the head and the tool.

How many tools can the WFT 13 hold?

An ATC magazine holds 20, 32, 40, 60, 80, 90 or 120 tools and exchanges them directly into the spindle or into a milling head parked in zero position. A robot tool changer holds 96, 125 or 189 tools and can load virtually any position of the head.

Can the WFT 13 be set up while it machines?

Yes — with the automatic pallet changer (APC). Up to two pallets are supported, sized 1 600 × 1 800, 1 800 × 2 200 or 1 800 × 2 600 mm with a maximum load of 15 t. One part is machined while the other pallet is cleaned and the next workpiece is clamped, which cuts unproductive time.

What is the lead time for this machine?

Machines held in stock ship in 4–12 weeks. A machine built to order takes 6–8 months, depending on configuration.

Get a tailored proposal for WFT 13/15 (R,L)

Our engineers spec the exact configuration for your application. We reply within 24 hours.

Browse all machines