Spindle Temperature Compensation
Thermal sensors track spindle growth and the CNC compensates automatically — stable accuracy from the first part of the shift to the last.
- Thermal stability
- No warm-up parts
- Consistent tolerance
How it works
A spindle warms up during the day and grows by tens of microns — enough to take a precision bore out of tolerance between morning and afternoon. Temperature sensors embedded along the spindle and headstock feed a thermal model in the CNC that offsets the axes in real time.
The operator does not warm up the machine on scrap parts and does not re-touch offsets during the shift: the first part and the hundredth part measure the same.
Available on these machines
Spindle Temperature Compensation is available as an option on the following FERMAT machines. Talk to our engineers about your configuration.
WFC 10/11 (L)
View machine
WFT 10/11 (L)
View machine
WFT 13/15 (R,L)
View machine
WRF 130/150/160/180/MILL
View machine
WF 13/15 R (L)
View machine
WRF HEAVY
View machineMore in Smart Technology
3D Kinematic Calibration
Measure and correct the machine's kinematic transformation — restores accuracy to the rotary axes without waiting for service.
Vibration Monitoring
Sensors on the spindle and ram watch vibration levels in real time — protecting the machine, the tool and the surface finish.
Adaptive Feed Control
The CNC adjusts feed rate in real time based on spindle load — shorter cycle times in light cuts, tool protection in heavy ones.
Want Spindle Temperature Compensation on your machine?
Our engineers will configure the right technology package for your application.