WFT 10/11 (L)

Series · WFT 10/11
  • Table-type layout, 10 000–20 000 kg table — The T10 table is standard at 10 000 kg; the optional longer X axis (3, 4 or 5 m) takes it to 20 000 kg, and a pallet change system keeps the spindle cutting while the next part is set up.
  • Ø 100/110 mm spindle, 730 mm stroke — Two-stage gearbox and three-belt drive up to 4 000 rpm — 5 000 rpm optionally — with a 250 mm support sleeve supplied as standard.
  • Active thermal compensation — Spindle dilation in the Z axis is compensated automatically, using four headstock temperature sensors and an air/oil-cooled gearbox to keep bearing temperature stable.
  • ATC or robot tool change — ATC for 20/30/40 tools exchanging into spindle or head, or a robot changer with up to 96 tools reaching virtually any head position.
Full demo on YouTube

Overview

The WFT 11 is a table-type horizontal boring and milling machine for parts too heavy to move once clamped, such as long weldments and complex welded frames. The column travels in Z on its own carriage while the rotary table carries the part across it. Table load is 10 000 kg as standard, or 20 000 kg with the optional longer X axis (3, 4 or 5 m); a pallet change system is available to keep the spindle cutting while the next part is set up. Headstock, column, beds and tables are designed and built by FERMAT in-house, keeping accuracy repeatable and spares on the shelf.

Explore WFT 10/11 (L)

Full technical specifications. Toggle between metric and imperial units.

WFT 10/11 (L) technical specifications
Parameter Units WFT 10/11WFT 10/11 L
Spindle diameter mm 100/110
Spindle taper — SK 50 (DIN, MAS 45°, ANSI)
Spindle speed (max.) rpm 4000 (opt. 5000)
Main Power Heidenhain or SIEMENS CNC (S1/S6-40%) kW 31/46.5
Max. Torque Heidenhain or SIEMENS CNC (S1/S6-40%) Nm 1416/2124
Main Power FANUC CNC (S1/S3-60%) kW 30/37
Max. Torque FANUC CNC (S1/S3-60%) Nm 1370/1692
X-axis Cross Travel of Table mm 2000/3000 (T10); optional 2000/3000/4000/5000/6000 (T20)
Y-axis Vertical Travel of Headstock mm 1250/1700/2000
Z-axis Longitudinal Travel of Column mm 1250/17001500
W-axis Spindle Travel mm 730
Rapid Feed X, Y, Z mm/min 12000/12000/800012000
Rapid Feed W mm/min 800012000
Rapid Feed B rpm 2 (opt. 5)
Max. Table Load kg 10000 (opt. 20000)
Table Size mm 1200×1200 / 1200×1400 / 1400×1600 / 1600×1600 / 1400×1800 / 1600×1800 — optional: 1600×1800 / 1800×2200 / 1800×2600 / 2000×2400 / 2500×2500 / 2000×3000

Customize WFT 10/11 (L)

Pick a category to see compatible accessories. Click any accessory to open its detail window.

Angle Heads & Facing Heads

Manual or automatic angle heads and facing heads for extended machining capability — UHAmi, UHA, PHA, PHAmi, OHA series and more.

Showing 6 of 6

Technology & Software

Smart technologies, control platforms and multitasking capabilities available on this machine. Click any item for details and the full list of compatible machines.

WFT 10/11 (L) FAQ

Procurement and engineering questions we hear about this model.

What is the difference between the WFT 11 and the cross-type WFC?

On the table-type WFT 11 the column sits on its own carriage and travels longitudinally in the Z axis, while the rotary table moves across in X. On the cross-type WFC the column is static and the workpiece travels in both X and Z. Moving the column instead of the load is what lets the WFT 11 carry a 10 000 kg table as standard.

How big a workpiece can the WFT 11 take?

The standard T10 rotary table is rated for 10 000 kg, with table sizes from 1 200 × 1 200 mm to 1 600 × 1 800 mm; a 20 000 kg table with larger plates is optional. Travels are 2 000 or 3 000 mm in X, 1 250 / 1 700 / 2 000 mm in Y and 1 250 or 1 700 mm in Z. The table carriage moves at up to 8 000 mm/min in X, 14 000 mm/min optionally.

What spindle is fitted to the WFT 11?

The boring spindle is 100 or 110 mm in diameter with an SK 50 taper (DIN, MAS 45°, ANSI) and runs up to 4 000 rpm, 5 000 rpm optionally. Live-spindle stroke in the W axis is 730 mm, driven by a servomotor with planetary gearbox and ball screw on linear guideways. A 250 mm support sleeve is a standard accessory and is recommended at long extensions to suppress vibration.

Why is the boring spindle belt-driven rather than direct-driven?

The main motor drives a two-stage gearbox and a three-belt transmission to the pulley of the main seating. The belts act as a mechanical fuse: in a crash they break first, so the main motor is not damaged. Spindle position (S axis) and speed are then measured directly on the spindle by an incremental magnetic rotary sensor rather than at the motor, so no gearbox or belt play enters the position feedback.

What is the machine structure made of?

Column, column carriage, beds and table carriages are grey cast-iron castings, annealed before machining — the process that gives them their rigidity and dimensional stability. The column carriage travels along the Z-axis bed on box guideways driven by a servomotor and ball screw through a belt transmission, and every guideway is lubricated automatically with oil. The Y-axis ball screw carries a 24 V electric brake at the top to hold the headstock.

How does the machine hold accuracy as it warms up?

Three measures work together. Gearbox oil circulates through an automatic air/oil cooler; four temperature sensors monitor the headstock and prevent the bearings from overheating; and an active compensation algorithm corrects spindle length dilation in the Z axis automatically, from empirical values held in a compensation table. Heat sources are both external — shop-floor air, the tool heating up — and internal, in the main and axial mounting bearings and the hollow-spindle drive.

How is the rotary table positioned and clamped?

The T10 table carriage runs on four box guideways of the bed via servomotor and ball screw. The clamping plate sits on a cross-roller bearing with an annular gear on its outer ring; the B axis rotates at 0–2 rpm, driven by two servomotors in master–slave mode through planetary gearboxes and pinions, and the set position is then locked mechanically by four hydraulic brakes.

How are automatic milling heads mounted?

Two connection points are available: a head holder at the front table face, or an automatic movable pick-up station. Both allow the head to be attached, positioned and its tool clamped without operator intervention.

Which milling heads fit the WFT 11?

Manual heads: PHM 20 (right angle), UHM 20 (universal) and OHM 20 (orthogonal), each 2 000 rpm / 20 kW, plus the OMG TA26.40 T right-angle head at 2 500 rpm / 150 Nm. Automatic heads: PHA 2.5° and OHA 2.5°, PHA 0.001°, all 4 000 rpm / 1 000 Nm, and the FERMAT C-axis right-angle kinematic with 0.001° indexing and 3 000 Nm clamping torque.

What is the lead time for this machine?

Machines held in stock ship in 4–12 weeks. A machine built to order takes 6–8 months, depending on configuration.

Get a tailored proposal for WFT 10/11 (L)

Our engineers spec the exact configuration for your application. We reply within 24 hours.

Browse all machines