Software & Digitalisation

Getting more out of the machine you already own — control-system options, offline preparation and production data.

What we offer

Showing only what runs on

Control system options

External programming

Programming at the machine costs spindle time: while the operator writes and proves the program, the machine is not cutting. On most shop floors the program is written at the machine, collisions turn up while jogging into the part, and the data from the job goes nowhere afterwards — the machine only earns while it is cutting, and every other minute is lost.

Moving that work off the machine, before production starts, is where most shops have the most to gain; protection on the machine while it cuts is a separate step. A programming station gives the identical control on a desktop, and CAM produces the toolpaths and proves them against a model of your own machine before a tool moves — the program is finished and checked before the machine even stops. Afterwards, production monitoring shows what the machine did with the time it got back.

Why this matters

How do you get more out of a machine you already own, without buying another one? The number of ways to do it is the problem — it pushes shops towards complicated projects with no clear plan.

A well-run production rests on three pillars: preparation, machining, and looking back at what happened. Each can be improved with options already available on the machine, and the value of some is easiest to see backwards: work out what a single collision and its stoppage would cost you.

Software & Digitalisation FAQ

3D Calibration Set

View service

Why does five-axis accuracy drift at all?

The control positions the rotary axes using a stored model of where those axes physically are. Bearings settle, thermal cycles move things fractionally, and the stored model gradually stops matching the machine. Nothing has broken — the description has just gone stale, and calibration refreshes it.

Do we need FERMAT on site to run it?

No, and that is the point. The set is operated by your own people after training, so calibration is something you can do before a demanding job instead of scheduling a service visit.

Collision Monitoring (DCM)

View service

Does it protect while jogging manually, or only in a program?

Both — and manual jogging is the more important half. A program can be verified beforehand; an operator driving the machine by hand towards an unfamiliar fixture cannot. That is where most collisions happen.

What does the delivery actually include?

Three things that only work together: the software option in the control, the 3D model of your specific machine, and the PLC setup. A FERMAT application engineer commissions it and trains your operators.

Programming Station

View service

How is this different from a CAM simulation?

CAM simulates the toolpath in its own environment. A programming station runs the actual control software with your PLC, so the program behaves exactly as it will at the machine — including the control’s own error messages.

CAM Software

View service

Why three systems instead of one recommendation?

Because the right answer depends on the shop. A jobbing shop that wants to program quickly from solids has a different problem from a toolroom that needs design and manufacturing in one database, or from a supplier of high-value parts on multitasking machines. We recommend the one that fits, not the one we have most of.

What does "handling our machines" actually mean?

A horizontal boring mill is not a machining centre with the spindle turned sideways. Collinear table and facing-head axes, quill travel, and multitasking behaviour all have to be in the post-processor and the kinematic model, or the simulation is confident and wrong.

NC Verification — CHECKitB4

View service

How is this different from the simulation in our CAM system?

A CAM simulation shows what CAM intended. CHECKitB4 runs the actual control software against a model of your machine, so it sees what the control will really do with your posted code — including the things the post-processor got wrong.

What does "two layers of protection" mean?

Verification off the machine catches the mistake in the program before anything moves. Collision monitoring on the machine catches what nobody programmed — an operator jogging into a fixture. They fail differently, which is why having both is worth more than having either twice.

Production Monitoring — StateMonitor

View service

Does it work on machines that are not FERMAT?

Yes. It collects data regardless of the machine’s make or control type, which is the point — a bottleneck analysis of half your shop is not an analysis.

What do we actually do with the data?

Find the bottleneck. Throughput is set by one constraint at a time, and improving anything else changes nothing. The value is in knowing which machine that is this month, rather than assuming.

Not sure which one you need?

Tell us the machine and its serial number — we look up the configuration and answer specifically rather than generally.

Technical support: technicalsupport@fermat.cz

Service: service@fermat.cz

Monday to Friday, 7:30–15:00 CET/CEST