Horizontal Floor-Type Machines

Horizontal floor-type boring & milling machines with cross-wise travel of column, designed for machining of workpieces of up to 100 tons.

3 models in this category

FERMAT WF 13/15 R floor-type horizontal boring mill with ram headstock

WF 13/15 R (L)

The WF 13/15 R (L) is FERMAT's floor-type horizontal boring mill for coordinate drilling, boring and threading of large, heavy workpieces set on floor plates or a rotary table. A 130 mm or 150 mm spindle travels 800 mm in the W axis, the ram advances a further 700 mm in Z, and the headstock covers 2 000-3 500 mm of vertical travel while the column crosses 4 000-22 000 mm in X. The cast structure is built to absorb vibration during heavy cuts, and the headstock takes FERMAT's automatic milling heads and other accessories.

Learn more
Spindle Ø
130 / 150 mm
X-axis travel
4000 - 18 100 mm
Y-axis travel
2000/2500/3000/3500 mm
Z-axis travel
700 mm
Quill (W-axis)
800 mm
Ram (V-axis)
—
Table load
T10 - 10 000 / T20 - 20 000 / T25 - 25 000 / T50 - 50 000 / T60 - 60 000 kg
Table size
—
FERMAT WRF 160 floor-type horizontal boring mill

WRF 130/150/160/180/MILL

The WRF 130/150/160/180 is FERMAT's large floor-type horizontal boring mill series for very large, heavy workpieces, offered with a boring headstock (130, 150, 160 or 180 mm spindle, 800-1000 mm spindle travel, optional tilting) or a milling headstock (5 000 rpm, no boring spindle) for fast milling and drilling of medium and large parts. The column is a massively constructed, annealed weldment; the boring headstock is cast iron GGG60 with a digitally-controlled servomotor regulating spindle rpm. Workpieces sit on floor plates or rotary tables rated to 100 t.

Learn more
Spindle Ø
130 / 150 / 160/180 / mm
X-axis travel
4 900 - 25 700 / 4 900 - 25 700 / 4 900 - 25 700 / 4 900 - 25 700 mm
Y-axis travel
2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 / 5500 / 6000 / 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 / 5500 / 6000 / 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 / 5500 / 6000 / 2000 - 6000 mm
Z-axis travel
1200 / 1200 mm
Quill (W-axis)
800 / 1000 / 1000 / mm
Ram (V-axis)
—
Table load
T10 - 10 000 / T20 - 20 000 / T25 - 25 000 / T50 - 50 000 / T60 - 60 000 / T80 - 80 000 / T100 - 100 000 kg
Table size
—
FERMAT WRF HEAVY floor-type horizontal boring mill with the headstock between two columns

WRF HEAVY

The WRF Heavy is FERMAT's largest floor-type horizontal boring mill, built for oversized workpieces that need a wider, taller working envelope than the standard WRF series. Its headstock sits between two columns rather than one, with four servomotors and four rack-and-pinion drives moving it along a 4 000-10 000 mm Y-axis travel. The 150 mm or 160 mm spindle extends 1 000 mm in W, and the ram strokes 1 600 mm in Z. Workpieces are set on floor plates or a rotary table rated to 100 t.

Learn more
Spindle Ø
160 mm
X-axis travel
17 650 / 19 600 / 23 650 / 28 000 mm
Y-axis travel
6 000 / 8 000 / 10 000 mm
Z-axis travel
1600 mm
Quill (W-axis)
1000 mm
Ram (V-axis)
—
Table load
T25 - 25 000 / T50 - 50 000 / T60 - 60 000 / T100 - 100 000 kg
Table size
—

Not sure which horizontal floor-type machines model fits your application?

Our engineers will spec the right configuration for your specific production requirements.

All categories