Rebuilding & Retrofit
Horizontal boring mills, lathes and vertical turning lathes: overhauled, retrofitted with a new CNC, or fitted with a new headstock.
Overview
A rebuild starts from the machine's frame, which stays. Around it the worn parts are overhauled or replaced: headstock and spindle, electrical equipment, drives, control, covers and guarding.
Mechanical wear shows up as inaccuracy in the parts, even when the control is still sound. The spindle bearings usually carry more operating hours than any other part of the machine, so a rebuild has to deal with the mechanics, not only with the control.
Two companies of the FERMAT group do this work. FERMAT Pressl in Rokycany rebuilds heavy horizontal boring machines, lathes, vertical turning lathes (Pressl calls them carousels) and rotary tables. R.O.S.P. in Planá nad Lužnicí specialises in TOS horizontal boring machines and MAS MCV 1000 machining centres, and makes spindles for them. The machines they rebuild are not only FERMAT's own.
Which machines we rebuild
FERMAT Pressl rebuilds heavy horizontal boring machines, above all ŠKODA W 160 to W 250 and TOS Varnsdorf WHN, and also horizontal lathes, vertical turning lathes, rotary tables and horizontal mills of Czech and foreign make.
R.O.S.P. rebuilds TOS horizontal boring machines (WH 10, W 100 A) and MAS MCV 1000 machining centres. It also services and repairs TOS W 100, WHN 9, DIXI, MAS WXH 100, the coordinate boring machines MAS WKV 100, SIP and Mikromat, and TOS SV 18 RA/RD and MAS Masturn MT lathes.
FERMAT Stroje Lipník supplies service and spare parts — not rebuilds — for machines made by Strojtos Lipník: FGS 40/50/63 knee-type milling machines, VMC 40/50/60, MC 50/80 and FGU 80 machining centres and SU 50 lathes.
Vertical turning lathes, lathes and rotary tables
On the Toshulin vertical turning lathes in our stock, everything is changed and only the frame stays. The stock list holds Toshulin SKQ, SKIQ and POWERTURN units and a Schiess DKE 280. Each Toshulin card gives the origin — built by Toshulin, overhauled by FERMAT — the table diameter (Ø 1 250 to Ø 2 000 mm), the main drive (40 to 60 kW), the tool changer (15 or 45 pockets) and coolant through the spindle at 20 bar.
The card of the Schiess DKE 280 lists a new control with a 21″ touchscreen and a remote panel with a handwheel, new servomotors and linear transducers on the X and Z axes, a 12-station tool changer, new internal and external tool cooling up to 15 bar with new chip conveyors, a new electrical cabinet with all-new cabling, and full perimeter guarding. Its table is Ø 2 800 mm, the maximum turning diameter 3 000 mm and the load capacity 18 t.
FERMAT Pressl's design department prepares projects for the overhaul and modernisation of lathes, carousels and rotary tables, and its fitters service rotary tables, lathes and carousels at the customer's site. Carousel is Pressl's own word for a vertical turning lathe.
For horizontal lathes FERMAT Pressl offers a general overhaul, a move to CNC, new electrical equipment, a larger turning diameter and special equipment to the customer's specification; the lathe is dismantled and reassembled, with training in operation and maintenance. R.O.S.P. services and repairs TOS SV 18 RA, SV 18 RD and MAS Masturn MT lathes, including their headstocks.
FERMAT Pressl repairs rotary tables and supplies new ones with a load capacity from 25 to 80 t. It has also developed a carousel table with a Ø 1 800 mm clamping plate: it turns the workpiece in vertical-turning mode and positions it on the B axis for milling or drilling, and is meant above all for portal and horizontal milling machines.
The rebuilt machines are in stock
You do not have to take a rebuild on trust. Rebuilt machines are listed on our stock page next to new and used ones, across machine types — horizontal boring mills, gantry machines, vertical turning lathes, lathes and machining centres.
Each card lists the configuration of that unit: its origin — for example built by TOS Varnsdorf, overhauled by FERMAT — then table, travels, spindle, control and, where the machine has them, a tool changer and coolant through the spindle.
The standard warranty on a rebuilt machine is 12 months, and every rebuilt machine in stock shows it on its card. Use the machine and condition filters on the stock page to see only vertical turning lathes, or only rebuilt machines.
Facts
| Parameter | Rebuilding & Retrofit |
|---|---|
| TOS WH 10 → CNC | CNC retrofit. Full 5-axis CNC on the original frame; new control, drives, motors and measuring; spindle 2 500 rpm, ISO 50, headstock cooled by a refrigeration unit; table 1 000 × 1 120 mm, 2 000 kg; travels X/Y/Z/W 1 250/1 100/900/540 mm; rapid feed 8 000 mm/min; positioning accuracy below 0.02 mm. Stated by R.O.S.P. |
| TOS W 100 A | Overhaul, the machine stays manual. Frame and headstock overhauled; new spindle ISO 50, new hydraulic tool clamping, central lubrication, new compact switchboard; table 1 250 × 1 250 mm, 3 000 kg; travels 1 600/1 120/1 250/900 mm; positioning accuracy below 0.02 mm. Stated by R.O.S.P. |
| MAS MCV 1000 | CNC retrofit to a machining centre. Overhauled frame and headstock; new spindle ISO 40 with new tool clamping; new control with a touchscreen, drives, motors and scales; central lubrication; new compact switchboard; table 1 300 × 600 mm, 700 kg; travels 1 000/600/660 mm; positioning accuracy below 0.01 mm. Stated by R.O.S.P. |
| ŠKODA WD 160 A | New headstock. New headstock from FERMAT's WRF 160; modernised rotary tables and milling heads; travels X 5 800, Y 2 000, Z 1 200, W 1 000 mm; handed over 6/2018. Stated by FERMAT Pressl. |
| ŠKODA W 160 G | Full modernisation. Two new rotary tables 2 000 × 2 500 mm, 25 t; new milling heads; high-pressure coolant 35 bar; automatic tool changer; probe; chip conveyor; travels X 8 000, Y 2 900, Z+W 1 600 mm; handed over 8/2018. Stated by FERMAT Pressl. |
| WHN 13 P CNC | New Ø 130 mm spindle. Spindle Ø 130 mm running to 3 000 rpm; table 1 600 × 1 800 mm; travels X 3 500, Y 2 000, Z 1 250 mm; the reference list shows several units modernised between 2020 and 2021. Stated by FERMAT Pressl. |
How it works
-
Machine survey
The fitters inspect the machine, at your premises if needed, and recommend the extent of the repair. At FERMAT Pressl every rebuild is a project of its own, and R.O.S.P. likewise proposes a modernisation programme for the specific machine.
-
Dismantling
The machine is taken apart at your site and the parts are brought to Rokycany.
-
Machining and new components
The parts are cleaned and the main mechanical parts are machined in a FERMAT plant. New electrical equipment, units and hydraulic components are ordered and arrive together with them.
-
Assembly and test
The machine is assembled and tested in Rokycany and given a new coat of paint.
-
Acceptance
You are invited to test the machine and take it over before it is taken apart again for transport.
-
Installation and training
The machine is reinstalled at your premises, with training in operation and maintenance. Smaller jobs, such as a spindle that heats up, are done on site by the fitters.
What's included
Overhaul — the machine stays as it is
A general overhaul restores the machine without changing how it is operated. R.O.S.P.'s example is the TOS W 100 A, which stays manual: frame and headstock are overhauled, a new spindle and new hydraulic tool clamping are fitted, central lubrication and a new compact switchboard are added, and position measurement is added on the X, Y, Z and B axes.
CNC retrofit — a new control on the original frame
A retrofit is not the same thing as a general overhaul. R.O.S.P.'s example is the TOS WH 10, a boring machine of the 1980s rebuilt on its original frame as a full 5-axis CNC machine with new control, drives, motors and measuring. FERMAT Pressl also modernises boring machines with the original headstock and, where technically possible, raises the spindle speed, extends the X and Y travels and adds hydraulic balancing of the quill.
New headstock — a new spindle unit
A new headstock decides what the machine can run. FERMAT Pressl fits spindles of Ø 160 or 180 mm, which allows automatically clamped accessories, higher speeds and coolant through the spindle centre, and the machine can take an automatic tool changer or a robot. On the WHN 13 the new spindle is Ø 130 mm and runs to 3 000 rpm. A ŠKODA WD 160 A has been rebuilt with the headstock of FERMAT's own WRF 160.
Spindles, heads and rotary tables
R.O.S.P. makes new spindles for the WH 10, W 100 A, MCV 1000, MCV 1016 and BPH 20 NA, rebuilds WH 10 headstocks to 2 500–3 000 rpm with external cooling of the housing, and repairs spindles after collisions and seized diameters. FERMAT Pressl repairs milling and boring heads, chip conveyors and rotary tables, and supplies new rotary tables with a load capacity from 25 to 80 t.
Rebuilt machines in stock
See the machines the group has already rebuilt and has in stock: the configuration of each unit, and a 12-month warranty on every one of them.
See what it coversYour machine is not on the list?
Send us the make and model and we will come back with what a rebuild would involve — FERMAT machines and machines of other makes alike. FERMAT Pressl says it concentrates on machines built from 1960 onwards, because older machines are mechanically too outdated for a modernisation to pay off, and that it takes machines of around 100 to 150 t as long as no single part exceeds 30 t; super-heavy machines are beyond it, because of the size of its hall and entrances and the capacity of its cranes.
Rebuilding & Retrofit FAQ
What is the difference between an overhaul, a retrofit and a new headstock?
Which machines can be rebuilt?
Do you rebuild vertical turning lathes?
Does the machine have to travel to you?
How is the accuracy of a machine measured?
Is there a warranty on a rebuilt machine?
More services
Application Support
Training, control system options, diagnostics and equipment — everything the FERMAT application engineer brings after the machine is running.
Learn moreService & Maintenance
Helpline support, regular check-ups and maintenance — including specialised servicing of angle heads.
Learn moreSpare Parts
Genuine FERMAT spare parts delivered fast, so downtime stays short.
Learn moreLet's talk about rebuilding & retrofit
Tell us your machine and what you need — our service engineers will get back to you.
Technical support: technicalsupport@fermat.cz
Service: service@fermat.cz
Monday to Friday, 7:30–15:00 CET/CEST