Gantry & Bridge-Type Machines

Gantry / bridge-type machines with movable columns or table, and with a wide range of optional accessories.

4 models in this category

FERMAT GANTRY HEAVY-DUTY gantry machine with an O-shape crossbeam and columns

GANTRY HEAVY-DUTY

The Gantry Heavy Duty is FERMAT's boring-headstock gantry for heavy, complex machining of extra-large workpieces from five sides in a single setup. Columns and crossbeam form an 'O' shape for rigidity, carrying the same 160 mm spindle used on FERMAT's floor-type boring mills with a 1 000 mm W-axis extension. The ram travels up to 2 000 mm in Z, the headstock up to 7 800 mm in Y, and the columns 10 000-50 000 mm in X. Floor plates are available in 3 000, 4 000 or 5 000 mm widths.

Learn more
Spindle Ø
160 mm
X-axis travel
10 000 - 50 000 mm
Y-axis travel
5800/6800/7800 mm
Z-axis travel
1500/2000 mm
Quill (W-axis)
1 000 mm
Ram (V-axis)
—
Table load
—
Table size
—
FERMAT GANTRY HEAVY gantry machine with a boring headstock

GANTRY HEAVY

The Gantry Heavy is FERMAT's boring-headstock gantry machine, built to machine large workpieces from multiple sides in a single setup instead of moving the part between machines. The same 160 mm spindle used on FERMAT's floor-type boring mills extends 1 000 mm in the W axis, and the ram travels up to 1 500 mm in Z while the columns cross 10 000-50 000 mm in X and the headstock covers 6 100 mm in Y. Workpieces are set on 4 000 mm-wide floor plates, with a wide range of optional milling heads and accessories.

Learn more
Spindle Ø
160 mm
X-axis travel
7 000/9 000/11 000/13 000/15 000 mm
Y-axis travel
6 100/7 100 mm
Z-axis travel
1 500 mm
Quill (W-axis)
—
Ram (V-axis)
—
Table load
—
Table size
—
FERMAT FP bridge-type milling machine with a movable table

FP

The FP is FERMAT's bridge-type milling machine with a movable table that is sized to the workpiece rather than the other way round. The milling headstock runs to 5 000 or 6 000 rpm and moves 3 600-4 600 mm horizontally in Y, while the ram strokes up to 1 550 mm in Z. The table itself travels 4 500-8 500 mm in X, carries up to 25 000 kg, and is available in plate sizes from 4 000 x 2 000 mm to 8 000 x 3 000 mm. FERMAT's own UHAmi SDHS and PHAmi S heads, plus other milling heads, mount on the same headstock.

Learn more
Spindle Ø
—
X-axis travel
4500/5500/6500/8500 mm
Y-axis travel
3 600/4 100/4 600 mm
Z-axis travel
1550 mm
Quill (W-axis)
—
Ram (V-axis)
—
Table load
—
Table size
—
FERMAT FG gantry-type milling machine with a movable portal

FG

The FG is FERMAT's gantry-type milling machine with a movable portal running over a fixed table, for medium-size and large workpieces that stay clamped in place. The portal travels 7 000-13 000 mm in X, the milling headstock 3 600-4 600 mm horizontally in Y at up to 5 000 or 6 000 rpm, and the ram strokes up to 1 550 mm in Z. The fixed table is available from 2 000 x 6 000 mm up to 3 000 x 12 000 mm. FERMAT's own UHAmi SDHS and PHAmi S heads, plus other milling heads, mount on the same headstock.

Learn more
Spindle Ø
—
X-axis travel
7 000/9 000/11 000/13 000 mm
Y-axis travel
3 600/4 100/4 600 mm
Z-axis travel
1 550 mm
Quill (W-axis)
—
Ram (V-axis)
—
Table load
—
Table size
—

Not sure which gantry & bridge-type machines model fits your application?

Our engineers will spec the right configuration for your specific production requirements.

All categories