Equipment

What you clamp the part with and what you measure it with — the two things that decide how much of the day the machine actually cuts.

What we offer

Clamping

Tooling

Workpiece measurement

Why this matters

A large machine does not pay for itself on its own. It pays for itself through the number of hours a day it genuinely spends cutting — and the biggest hidden reserve is usually in clamping, because the part is being set up on the table while the spindle stands still.

Everything in this section has one aim: move the clamping and the setting-up off the machine. Clamping elements and pallets so the part is ready before it arrives. Tooling chosen for the part rather than for the catalogue. Probes and presetters so measuring the tool and setting the workpiece happen in minutes instead of hours.

Equipment FAQ

Zero Point Unit Pallet

View service

Can this be fitted to a machine we already have?

Yes — that is one of the reasons it exists. It gives an existing machine a large part of the benefit of automation without replacing it, because the change is in how the part reaches the table, not in the machine.

Is the pallet tied to one machine?

No. The intermediate pallet is a separate element, so the same pallet can go on a horizontal boring mill and on a gantry machine. That is what lets you re-plan the shop by priority rather than by what is already clamped.

FERMAT Modular Vices

View service

What makes these different from a bought-in vice?

They were developed for FERMAT’s own heavy machining, so the design started from parts that are long, heavy and awkward rather than from a standard product line. The modular rail is the practical consequence: you extend the clamping range by adding units instead of buying a bigger vice.

Workpiece Probe — Renishaw RMP

View service

Why radio rather than optical transmission?

Optical transmission needs line of sight between the probe and the interface. On a large horizontal borer or a gantry machine the part itself, the fixtures and the machine structure usually stand in the way. Radio does not care.

Not sure which one you need?

Tell us the machine and its serial number — we look up the configuration and answer specifically rather than generally.

Technical support: technicalsupport@fermat.cz

Service: service@fermat.cz

Monday to Friday, 7:30–15:00 CET/CEST