Machine Collision Monitoring
The control knows the shape of the machine and stops it before it hits itself — in automatic mode and while jogging by hand.
- Stops before contact
- Covers manual jogging
- Lower repair cost
How it works
Dynamic collision monitoring works from a 3D model of the machine held directly in the control. The system continuously calculates the relative positions of the machine's parts and stops the motion before contact — not only in automatic operation, but also while the operator is jogging by hand, which is where most collisions actually happen.
It is available on HEIDENHAIN and SIEMENS controls. Delivery covers the software option, the 3D model of the machine and the PLC setup; a FERMAT application engineer commissions the function and trains your people on it.
Paired with NC verification (CHECKitB4) checking the program before it ever reaches the machine, collision monitoring forms two independent layers of protection — one checks the code, the other watches the machine itself.
Available on these machines
Machine Collision Monitoring is available as an option on the following FERMAT machines. Talk to our engineers about your configuration.
WFC 10/11 (L)
View machine
WFT 10/11 (L)
View machine
WFT 13/15 (R,L)
View machine
WRF 130/150/160/180/MILL
View machine
WF 13/15 R (L)
View machine
WRF HEAVY
View machineMore in Smart Technology
3D Kinematic Calibration
Measure and correct the machine's kinematic transformation — restores accuracy to the rotary axes without waiting for service.
Vibration Monitoring
Sensors on the spindle and ram watch vibration levels in real time — protecting the machine, the tool and the surface finish.
Adaptive Feed Control
The CNC adjusts feed rate in real time based on spindle load — shorter cycle times in light cuts, tool protection in heavy ones.
Want Machine Collision Monitoring on your machine?
Our engineers will configure the right technology package for your application.