Vibration Monitoring
Sensors on the spindle and ram watch vibration levels in real time — protecting the machine, the tool and the surface finish.
- Spindle protection
- Surface quality
- Predictive maintenance
How it works
Accelerometers placed at the spindle and ram continuously measure vibration amplitude and frequency during machining. The system warns the operator when levels approach harmful thresholds and can automatically reduce feed or stop the cycle before chatter damages the workpiece surface, the tool or the spindle bearings.
Recorded vibration history also feeds predictive maintenance: a slowly rising baseline is an early signal of bearing wear — visible months before failure.
Available on these machines
Vibration Monitoring is available as an option on the following FERMAT machines. Talk to our engineers about your configuration.
WFC 10/11 (L)
View machine
WFT 10/11 (L)
View machine
WFT 13/15 (R,L)
View machine
WRF 130/150/160/180/MILL
View machine
WF 13/15 R (L)
View machine
WRF HEAVY
View machineMore in Smart Technology
3D Kinematic Calibration
Measure and correct the machine's kinematic transformation — restores accuracy to the rotary axes without waiting for service.
Adaptive Feed Control
The CNC adjusts feed rate in real time based on spindle load — shorter cycle times in light cuts, tool protection in heavy ones.
Machine Collision Monitoring
The control knows the shape of the machine and stops it before it hits itself — in automatic mode and while jogging by hand.
Want Vibration Monitoring on your machine?
Our engineers will configure the right technology package for your application.