+420 777 363 948 info@fermat.cz
Закрыть
Показать категорииСкрыть категории Показать фильтрыСкрыть фильтры
Год изготовления
ЧПУ
Выбрать
Больше
Производитель
Выбрать
Больше
123456 Список Плитка

Токарные станки

M 30 G Millturn
WFL Millturn
Инв. номер: 191504

Год изготовления:1999
Система управления Siemens: Sinumerik 840 C
Диаметр обработки: 520 mm
Длина обточки: 1050 mm
Наклонная станина: Да
Y ось: Да
Передвижение по оси Y (Токарные станки: 160 mm

LT 25-M
Okuma Corporation
Инв. номер: 241101

Год изготовления:1995
Система управления OKUMA: OSP 7000L
Диаметр обработки: 650 mm
Длина обточки: 1450 mm
Наклонная станина: Да
Y ось:
Противошпиндель: Да

SNG 1600x10000
NILES-SIMMONS Industrieanlagen GmbH
Инв. номер: 231675

Система управления Fanuc: 0i-TF
Диаметр обработки: mm
Длина обточки: 10000 mm
Наклонная станина: Нет
Диаметр отверстия в шпинделе: no mm
Револьверная головка: Нет

SPRY 40 CNC
TAJMAC-ZPS, a.s.
Инв. номер: 161667

Год изготовления:1991
Система управления Mefi: - - -
Диаметр обработки: 110 mm
Длина обточки: 300 mm
Наклонная станина: Нет
Диаметр отверстия в шпинделе: 50 mm
Макс. диаметр прутка: 40 mm

Takamaz XL-100
Takamatsu
Инв. номер: 241307

Год изготовления:2011
Система управления Fanuc: 0i - TD
Диаметр обработки: 120 mm
Длина обточки: 250 mm
Наклонная станина: Да
Y ось: Нет
Противошпиндель: Нет

SL-154SY
MORI SEIKI
Инв. номер: 221725

Год изготовления:2001
Макс. длина заготовки: 348 mm
Макс. диаметр обр-ки над станиной: 300 mm
Передвижение по оси X: 215 mm
Передвижение по оси Y: +40/-30 mm
Передвижение по оси Z: 490 mm
Ось C: 0,001 °

L 20 (L 320)
Citizen
Инв. номер: 171899

Год изготовления:1995
Диаметр обработки: 20 mm
Длина обточки: 200 mm
Наклонная станина:
Y ось: Да
Противошпиндель: Да
Диаметр отверстия в шпинделе: mm

EMCO MAT E300
EMCO
Инв. номер: 211793

Год изготовления:2010
Система управления Fagor:
Диаметр обработки: 550 mm
Длина обточки: 3000 mm
Наклонная станина: Нет
Диаметр отверстия в шпинделе: 160 mm
Револьверная головка: Нет

LVT 300
Okuma Corporation
Инв. номер: 231282

Год изготовления:2002
Система управления OKUMA: OSP-U100L
Диаметр обработки: 280 mm
Длина обточки: 200 mm
Наклонная станина: Нет
Диаметр отверстия в шпинделе: 62 mm
Револьверная головка: Да

123456

Lathe – is a mechanical device that uses a chip machining to change a shape of the material or component by rotation or cutting into its final product (semi-finished product).  Using the lathe, it is possible to produce rotary parts, drill holes, cut external and internal threads.

The material (product) is clamped in the chuck. The lathe is produced in several dimensions, according to turntable diameter or turning length. Other equipment can be a revolver head, milling head, counter spindle, tailstock, chip conveyor (for extracting metal chips), cooling system (during turning a lot of heat is generated, which must be cooled. The cooling can be internal or external and according to its strength is expressed in bars).In case of CNC lathes. For numerically controlled lathes, if the manufacturer does not have its own system, it is possible to choose the system which is commonly used, for example: Fanuc, Siemens, Heidenhain or Fagor.  

Types of lathes:

  • Center type lathes
  • Facing lathes
  • Semi-automatic copying lathes
  • Vertical lathes (carousels)
  • Revolver type (poloautomaty, jednovřetenové, několikavřetenové)
  • CNC lathes
  • Special

The regular lathe consists of following parts: beds, spindle, support, tailstock spindle or sliding gearbox. 

Basic division of the inclination of the lathe bed: 

  • horizontal or sloping (inclination 45 degrees)
  • sliding or linear

Clamping part – it is usually formed by a chuck on one side and tailstock on the other, or a chuck and second clamping part by a counter spindle. 

Cutting part – formed by a cutting wedge attached to the longitudinal part - the Z axis.

The transverse part (perpendicular to the axis of the spindle) designated as the X-axis, or the automatic tool head, also usually located on the transverse feed on the machine. 

Other axes, used especially in case of CNC lathes:

  • axis C1 (indexed spindle position, 
  • axis C2 (indexed axis of the  counter spindle)
  • axis Y (Axis Y enables movement of tool perpendicular to axis Z and machining with live tools)
  • axis B (indexed support axis)

The machine can be erupted with a measuring tool probe (automatically or manually foldable).

According to the technological operation, turning is focused on processing of:

  • Cylindrical surfaces
  • Front surfaces
  • Conical surfaces
  • Threads

There are several hundreds manufacturers in the world, among the most popular in Czech republic are: TOS, MAZAK, DOOSAN, ŠKODA, OKUMA, GILDEMEISTER, HAAS, KOVOSVIT, GOODWAY, TAJMAC-ZPS.