+40 737 379 479 info@fermat.cz
Închide
Vizualizare categoriaAscunde categoria
Strunguri
Arată filtre Ascunde filtrele
An fabricație
Sistem de comandă CNC
Alegeți sistem de comandă
Mai mult
Producător
Alegeți producătorul
Mai mult
CNC - Diametru pînă la 800 mm
CNC - Diametru peste 800 mm
CNC multiax
Paralel - Diametru pînă la 800 mm
Paralel - Diametru peste 800 mm
Automate

TOP ofertă

Harrison TU 360Harrison TU 360Harrison TU 360Harrison TU 360Harrison TU 360Harrison TU 360Harrison TU 360Harrison TU 360Harrison TU 360Harrison TU 360Harrison TU 360Harrison TU 360

Harrison TU 360
Colchester
Nr. inv.: 251748
Cincom A20-VIICincom A20-VIICincom A20-VIICincom A20-VIICincom A20-VIICincom A20-VIICincom A20-VIICincom A20-VIICincom A20-VIICincom A20-VIICincom A20-VII

Cincom A20-VII
Citizen
Nr. inv.: 251630
Proturn SLX 1630Proturn SLX 1630Proturn SLX 1630Proturn SLX 1630Proturn SLX 1630Proturn SLX 1630Proturn SLX 1630

Proturn SLX 1630
XYZ
Nr. inv.: 251459
123456789 Listă Grilă

Strunguri

SN 63 B/3000SN 63 B/3000SN 63 B/3000SN 63 B/3000

SN 63 B/3000
TOS Trenčín
Nr. inv.: 241153

: 630
Distanța dintre vârfuri: 3000 mm
Greutatea maximă a piesei de lucru: kg
: 340
Diametrul mandrinei: 315 mm
Alezaj ax': 72 mm

SN 63/2000
TOS Trenčín
Nr. inv.: 241170

: 630
Distanța dintre vârfuri: 2000 mm
Greutatea maximă a piesei de lucru: kg
: 340
: 7,5
: 4000x1200x

SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000SN 63 B/2000

SN 63 B/2000
TOS Trenčín
Nr. inv.: 241617

An fabricație:1994
: 630
Distanța dintre vârfuri: 2000 mm
Greutatea maximă a piesei de lucru: kg
: 340
: 7.5
: 4000 x 1400 x 1520

CTX 210 V1CTX 210 V1CTX 210 V1CTX 210 V1CTX 210 V1CTX 210 V1CTX 210 V1CTX 210 V1CTX 210 V1CTX 210 V1

CTX 210 V1
Gildemeister
Nr. inv.: 241719

An fabricație:2004
Sistem de control Fanuc:
Diametrul de strunjire: 380 mm
:
Deplasarea pe axa X: 151 mm
: 339
: 290

SN 71 B/2000SN 71 B/2000SN 71 B/2000SN 71 B/2000SN 71 B/2000SN 71 B/2000SN 71 B/2000SN 71 B/2000

SN 71 B/2000
TOS Trenčín
Nr. inv.: 241614

An fabricație:1979
: 710
Distanța dintre vârfuri: 2000 mm
Greutatea maximă a piesei de lucru: 850 kg
: 420
: 10 - 1000
: 7,5

CTX 210 V3CTX 210 V3CTX 210 V3CTX 210 V3CTX 210 V3CTX 210 V3CTX 210 V3CTX 210 V3CTX 210 V3CTX 210 V3CTX 210 V3

CTX 210 V3
Gildemeister
Nr. inv.: 241721

An fabricație:2006
Sistem de control Fanuc: Fanuc 32i
Diametrul de strunjire: 290 mm
: 339
Batiu inclinat/oblic: da
: nu
Contra-ax: nu

SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000SN 50 C/2000

SN 50 C/2000
Trens
Nr. inv.: 251283

An fabricație:2005
: 500
Distanța dintre vârfuri: 2000 mm
Greutatea maximă a piesei de lucru: 300 kg
: 270
Alezaj ax': 52 mm
: 22 - 2000

CTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNCCTX 310 V3 CNC

CTX 310 V3 CNC
Gildemeister
Nr. inv.: 241273

An fabricație:2005
: Sinumerik 840 D
Diametrul de strunjire: 365 mm
: 450
Batiu inclinat/oblic: da
: nu
Contra-ax: nu

SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500

SN 50 C/1500
TOS Trenčín
Nr. inv.: 251268

An fabricație:2015
: 500
Distanța dintre vârfuri: 1500 mm
Greutatea maximă a piesei de lucru: 300 kg
: 220
Puterea motorului principal: 5,5 kW
: 1750

SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000SN 71 C/2000

SN 71 C/2000
Trens
Nr. inv.: 251281

An fabricație:2006
: 710
Distanța dintre vârfuri: 2000 mm
Greutatea maximă a piesei de lucru: 850 kg
: 420
Alezaj ax': 73,5 mm
: 10 - 1000

SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180SP 180

SP 180
KOVOSVIT MAS, a.s.
Nr. inv.: 251589

An fabricație:2005
: Sinumerik 840 D
Diametrul de strunjire: 180 mm
: 400
Batiu inclinat/oblic: da
Alezaj ax': 63 mm
: da

SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500SN 50 C/1500

SN 50 C/1500
Trens
Nr. inv.: 251282

An fabricație:2005
: 500
Distanța dintre vârfuri: 1500 mm
Greutatea maximă a piesei de lucru: 300 kg
: 270
Alezaj ax': 52 mm
: 22 - 2000

ZL-250MC/600ZL-250MC/600ZL-250MC/600ZL-250MC/600ZL-250MC/600ZL-250MC/600ZL-250MC/600ZL-250MC/600ZL-250MC/600ZL-250MC/600

ZL-250MC/600
MORI SEIKI
Nr. inv.: 201166

An fabricație:1999
Diametrul maxim de strunjire: 390 mm
: 700
Distanța dintre vârfuri: 725 mm
: 35 - 3500
Alezaj ax': 86 mm
Deplasarea pe axa X: 1:238/2:173 mm
Masturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNCMasturn MT 50/1500 CNC

Masturn MT 50/1500 CNC
KOVOSVIT MAS, a.s.
Nr. inv.: 251722

An fabricație:1999
Sistem de control Heidenhain: Manual Plus M
Diametrul de strunjire: 500 mm
: 1500
Batiu inclinat/oblic: nu
Alezaj ax': 82 mm
: nu

SU 63 A/6500SU 63 A/6500SU 63 A/6500SU 63 A/6500SU 63 A/6500SU 63 A/6500SU 63 A/6500SU 63 A/6500SU 63 A/6500SU 63 A/6500

SU 63 A/6500
TOS Čelákovice
Nr. inv.: 241365

An fabricație:1965
: 630
Distanța dintre vârfuri: 6500 mm
Greutatea maximă a piesei de lucru: 6000 kg
: 360
Alezaj ax': 60 mm
: 8 - 375

WNC 300 S-560WNC 300 S-560WNC 300 S-560WNC 300 S-560WNC 300 S-560WNC 300 S-560WNC 300 S-560

WNC 300 S-560
VOEST - ALPINE
Nr. inv.: 251499

Sistem de control NCT:
: 500
: 470
: 345
Alezaj ax': 77 mm
: 0 - 3000

ST-20ST-20ST-20ST-20ST-20ST-20ST-20ST-20ST-20ST-20

ST-20
Haas Automation
Nr. inv.: 251109

An fabricație:2013
Sistem de control Haas:
Diametrul de strunjire: 330 mm
: 572
Batiu inclinat/oblic: da
Alezaj ax': 64 mm
: da

C 630 BEC 630 BEC 630 BEC 630 BE

C 630 BE
ZMM Bulgaria
Nr. inv.: 251166

Sistem de control Heidenhain:
Diametrul de strunjire: 630 mm
: 1000
Batiu inclinat/oblic: nu
Alezaj ax': 103 mm
: da

SUI 500 COMBISUI 500 COMBISUI 500 COMBISUI 500 COMBISUI 500 COMBISUI 500 COMBI

SUI 500 COMBI
TOS Trenčín
Nr. inv.: 241550

An fabricație:1999
: 810 D
Diametrul de strunjire: 500 mm
: 1500
Batiu inclinat/oblic: nu
Alezaj ax': 71 mm
Capul revolver:

Puma 2600YPuma 2600YPuma 2600YPuma 2600YPuma 2600YPuma 2600YPuma 2600YPuma 2600YPuma 2600YPuma 2600YPuma 2600YPuma 2600YPuma 2600Y

Puma 2600Y
Doosan
Nr. inv.: 242082

An fabricație:2015
Sistem de control Fanuc: Series 0i
Diametrul de strunjire: 376 mm
: 760
Batiu inclinat/oblic: da
: da
Contra-ax: nu

SUS 63/2000SUS 63/2000SUS 63/2000SUS 63/2000SUS 63/2000SUS 63/2000SUS 63/2000

SUS 63/2000
TOS Čelákovice
Nr. inv.: 251294

An fabricație:1990
: 630
Distanța dintre vârfuri: 2000 mm
Greutatea maximă a piesei de lucru: 2000 kg
: 390
Alezaj ax': 81 mm
: 9 -

DECO 13aDECO 13aDECO 13aDECO 13aDECO 13aDECO 13aDECO 13aDECO 13aDECO 13aDECO 13aDECO 13aDECO 13aDECO 13aDECO 13a

DECO 13a
Tornos Bechler
Nr. inv.: 251718

An fabricație:2008
Lungimea maximă a piesei de lucru: 184 mm
:

Masturn MT 550 CNCMasturn MT 550 CNCMasturn MT 550 CNCMasturn MT 550 CNC

Masturn MT 550 CNC
KOVOSVIT MAS, a.s.
Nr. inv.: 251253

An fabricație:2012
Sistem de control Heidenhain: Manual Plus 4110
Diametrul de strunjire: 500 mm
: 1500
Batiu inclinat/oblic: nu
Alezaj ax': 82 mm
Capul revolver: nu

QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II QUICK TURN NEXUS 200-II

QUICK TURN NEXUS 200-II
MAZAK
Nr. inv.: 251438

An fabricație:2007
: MATRIX NEXUS
Diametrul de strunjire: 350 mm
: 1021
Batiu inclinat/oblic: da
Alezaj ax': ano mm
Capul revolver: nu

SV 18 RA/1000SV 18 RA/1000SV 18 RA/1000SV 18 RA/1000SV 18 RA/1000

SV 18 RA/1000
TOS Trenčín
Nr. inv.: 241713

: 380
Distanța dintre vârfuri: 1000 mm
Greutatea maximă a piesei de lucru: 300 kg
: 215
: 14 - 2800
Puterea motorului principal: 6 kW
123456789

Lathe – is a mechanical device that uses a chip machining to change a shape of the material or component by rotation or cutting into its final product (semi-finished product).  Using the lathe, it is possible to produce rotary parts, drill holes, cut external and internal threads.

The material (product) is clamped in the chuck. The lathe is produced in several dimensions, according to turntable diameter or turning length. Other equipment can be a revolver head, milling head, counter spindle, tailstock, chip conveyor (for extracting metal chips), cooling system (during turning a lot of heat is generated, which must be cooled. The cooling can be internal or external and according to its strength is expressed in bars).In case of CNC lathes. For numerically controlled lathes, if the manufacturer does not have its own system, it is possible to choose the system which is commonly used, for example: Fanuc, Siemens, Heidenhain or Fagor.  

Types of lathes:

  • Center type lathes
  • Facing lathes
  • Semi-automatic copying lathes
  • Vertical lathes (carousels)
  • Revolver type (poloautomaty, jednovřetenové, několikavřetenové)
  • CNC lathes
  • Special

The regular lathe consists of following parts: beds, spindle, support, tailstock spindle or sliding gearbox. 

Basic division of the inclination of the lathe bed: 

  • horizontal or sloping (inclination 45 degrees)
  • sliding or linear

Clamping part – it is usually formed by a chuck on one side and tailstock on the other, or a chuck and second clamping part by a counter spindle. 

Cutting part – formed by a cutting wedge attached to the longitudinal part - the Z axis.

The transverse part (perpendicular to the axis of the spindle) designated as the X-axis, or the automatic tool head, also usually located on the transverse feed on the machine. 

Other axes, used especially in case of CNC lathes:

  • axis C1 (indexed spindle position, 
  • axis C2 (indexed axis of the  counter spindle)
  • axis Y (Axis Y enables movement of tool perpendicular to axis Z and machining with live tools)
  • axis B (indexed support axis)

The machine can be erupted with a measuring tool probe (automatically or manually foldable).

According to the technological operation, turning is focused on processing of:

  • Cylindrical surfaces
  • Front surfaces
  • Conical surfaces
  • Threads

There are several hundreds manufacturers in the world, among the most popular in Czech republic are: TOS, MAZAK, DOOSAN, ŠKODA, OKUMA, GILDEMEISTER, HAAS, KOVOSVIT, GOODWAY, TAJMAC-ZPS.