+40 737 379 479 
info@fermat.cz
English 
Français 
L'italiano 
Magyar 
Deutsch 
Polski 
Русский 
Español 
Čeština 
Strunguri 
1234567 Listă Grilă
1234567Strunguri
| Denumire produs | Nr. inv. | Producător | An fabricație | Parametri | ||
|---|---|---|---|---|---|---|
 |
SU 80 A/ 5000 |
241305 | TOS Čelákovice | 1965 | Diametrul de strunjire: 800 mm Lungimea de strunjire: 5000 mm Batiu inclinat/oblic: nu Alezaj ax': 70 mm Capul revolver: nu Diametru periferic peste ghidaje: 495 mm |
|
 |
SU 63 A/6500 |
241365 | TOS Čelákovice | 1965 | Diametru periferic deasupra batiului: 630 mm Distanța dintre vârfuri: 6500 mm Greutatea maximă a piesei de lucru: 6000 kg Diametru periferic peste ghidaje: 360 mm Alezaj ax': 60 mm Viteza axului: 8 - 375 /min. |
|
 |
TRA 90 |
241308 | Poreba | 1966 | Diametru periferic deasupra batiului: 900 mm Diametru periferic peste ghidaje: 630 mm |
|
 |
SR 2000x8 |
201865 | ŠKODA MACHINE TOOL a.s. | 1976 | Diametru periferic deasupra batiului: 2000 mm Distanța dintre vârfuri: 8000 mm Greutatea maximă a piesei de lucru: 60000 kg Geutatea mașinii: 36400 kg Puterea motorului principal: 60 kW Dimensiunile mașinii L x l x Î: 14500 x 3600 x 2950 mm |
|
 |
SV 18 RA |
241513 | TOS Trenčín | 1981 | Diametru periferic deasupra batiului: 380 mm Distanța dintre vârfuri: 1500 mm Greutatea maximă a piesei de lucru: 355 kg |
|
 |
TCG 125x5000 |
231070 | Poreba | 1984 | Diametru periferic deasupra batiului: 1250 mm Distanța dintre vârfuri: 5000 mm Greutatea maximă a piesei de lucru: 30000 kg Lungimea de strunjire: 5000 mm |
|
 |
SUI 63 NC/1500 |
092574 | TOS Hulín | 1986 | Diametru periferic deasupra batiului: 630 mm Distanța dintre vârfuri: mm Greutatea maximă a piesei de lucru: kg |
|
 |
SPRY 40 CNC |
161667 | TAJMAC-ZPS, a.s. | 1991 | Sistem de control Mefi: - - - Diametrul de strunjire: 110 mm Lungimea de strunjire: 300 mm Batiu inclinat/oblic: nu Alezaj ax': 50 mm Diametrul maxim al bării : 40 mm |
|
 |
SR-16 |
241189 | STAR | 1992 | Lungimea maximă a piesei de lucru: 205 mm Diametru periferic deasupra batiului: 16 mm Contra-ax: da Geutatea mașinii: 1700 kg Alimentator de bãri: da Scule acționate: da |
|
 |
SUN 125/3000 CNC |
201355 | ŠKODA MACHINE TOOL a.s. | 1994 | Sistem de control Siemens: Sinumerik 810 Diametrul de strunjire: 1320 mm Lungimea de strunjire: 3000 mm Batiu inclinat/oblic: nu Alezaj ax': 140 mm Capul revolver: nu |
|
 |
LT 25-M |
241101 | Okuma Corporation | 1995 | Sistem de control OKUMA: OSP 7000L Diametrul de strunjire: 650 mm Lungimea de strunjire: 1450 mm Batiu inclinat/oblic: da Axa Y: Contra-ax: da |
|
 |
L 20 (L 320) |
171899 | Citizen | 1995 | Diametrul de strunjire: 20 mm Lungimea de strunjire: 200 mm Batiu inclinat/oblic: Axa Y: da Contra-ax: da Alezaj ax': mm |
|
 |
ABC |
241123 | Index | 1996 | Sistem de control Siemens: Sinumerik 840 C Diametrul de strunjire: 90 mm Lungimea de strunjire: 280 mm Batiu inclinat/oblic: da Axa Y: nu Contra-ax: da |
|
 |
SU 100/6000 |
241117 | TOS Čelákovice | 1996 | Diametru periferic deasupra batiului: 1050 mm Distanța dintre vârfuri: 6000 mm Greutatea maximă a piesei de lucru: 5000 kg Diametru periferic peste ghidaje: 730 mm Puterea motorului principal: 22 kW Dimensiunile mașinii L x l x Î: 8800 x 2000 x 1500 mm |
|
 |
SN 63 S/3000 |
241355 | TOS Trenčín | 1996 | Diametru periferic deasupra batiului: 645 mm Distanța dintre vârfuri: 3000 mm Greutatea maximă a piesei de lucru: 1500 kg Diametru periferic peste ghidaje: 350 mm Diametrul mandrinei: 315 mm Alezaj ax': 77 mm |
|
 |
LT 10 M |
221480 | Okuma Corporation | 1997 | Sistem de control OKUMA: OSP 700L Diametrul de strunjire: 210 mm Lungimea de strunjire: 700 mm Batiu inclinat/oblic: da Alezaj ax': 52 mm Capul revolver: da |
|
 |
TNM 42 |
231228 | Traub | 1998 | Lungimea maximă a piesei de lucru: mm Diametru periferic deasupra batiului: mm Alezaj ax': 42 mm Sistem de control Traub: TX 8H Axa C: ano ° Viteza axului: 40 - 4000 /min. |
|
 |
ML 12 S |
191653 | Hanwha Corporation | 1998 | Sistem de control Fanuc: 0i - TC Diametrul de strunjire: mm Lungimea de strunjire: mm Batiu inclinat/oblic: nu Axa Y: da Deplasarea pe axa Y (Strunguri): mm |
|
 |
DECO 2000/20 |
241454 | Tornos Bechler | 1998 | Sistem de control Fanuc: Diametrul de strunjire: 20 mm Lungimea de strunjire: 180 mm Batiu inclinat/oblic: da Axa Y: da Deplasarea pe axa Y (Strunguri): 100 mm |
|
 |
ZL-250MC/600 |
201166 | MORI SEIKI | 1999 | Diametrul maxim de strunjire: 390 mm Diametru periferic deasupra batiului: 700 mm Distanța dintre vârfuri: 725 mm Viteza axului: 35 - 3500 /min. Alezaj ax': 86 mm Deplasarea pe axa X: 1:238/2:173 mm |
|
 |
Alpha 330 |
241452 | T.S.Harrison & Sons | 1999 | Sistem de control Fanuc: Diametrul de strunjire: 330 mm Lungimea de strunjire: 1000 mm Batiu inclinat/oblic: nu Alezaj ax': 42 mm Capul revolver: nu |
|
 |
M 30 G Millturn |
191504 | WFL Millturn | 1999 | Sistem de control Siemens: Sinumerik 840 C Diametrul de strunjire: 520 mm Lungimea de strunjire: 1050 mm Batiu inclinat/oblic: da Axa Y: da Deplasarea pe axa Y (Strunguri): 160 mm |
|
 |
Taurus 260 |
231758 | PINACHO | 2000 | Sistem de control Fagor: Diametrul de strunjire: 520 mm Lungimea de strunjire: 1500 mm Batiu inclinat/oblic: nu Alezaj ax': 80 mm Capul revolver: da |
|
 |
Mori BS18-III |
231319 | TSUGAMI | 2000 | Sistem de control Fanuc: 18i-T Diametrul de strunjire: 18 mm Lungimea de strunjire: 210 mm Batiu inclinat/oblic: nu Axa Y: da Contra-ax: da |
|
 |
MULTIPLEX 6200 |
231913 | MAZAK | 2000 | Sistem de control Mazatrol: 640 T Diametrul de strunjire: 320 mm Lungimea de strunjire: 440 mm Batiu inclinat/oblic: nu Axa Y: nu Contra-ax: da |
Lathe – is a mechanical device that uses a chip machining to change a shape of the material or component by rotation or cutting into its final product (semi-finished product). Using the lathe, it is possible to produce rotary parts, drill holes, cut external and internal threads.
The material (product) is clamped in the chuck. The lathe is produced in several dimensions, according to turntable diameter or turning length. Other equipment can be a revolver head, milling head, counter spindle, tailstock, chip conveyor (for extracting metal chips), cooling system (during turning a lot of heat is generated, which must be cooled. The cooling can be internal or external and according to its strength is expressed in bars).In case of CNC lathes. For numerically controlled lathes, if the manufacturer does not have its own system, it is possible to choose the system which is commonly used, for example: Fanuc, Siemens, Heidenhain or Fagor.
Types of lathes:
- Center type lathes
- Facing lathes
- Semi-automatic copying lathes
- Vertical lathes (carousels)
- Revolver type (poloautomaty, jednovřetenové, několikavřetenové)
- CNC lathes
- Special
The regular lathe consists of following parts: beds, spindle, support, tailstock spindle or sliding gearbox.
Basic division of the inclination of the lathe bed:
- horizontal or sloping (inclination 45 degrees)
- sliding or linear
Clamping part – it is usually formed by a chuck on one side and tailstock on the other, or a chuck and second clamping part by a counter spindle.
Cutting part – formed by a cutting wedge attached to the longitudinal part - the Z axis.
The transverse part (perpendicular to the axis of the spindle) designated as the X-axis, or the automatic tool head, also usually located on the transverse feed on the machine.
Other axes, used especially in case of CNC lathes:
- axis C1 (indexed spindle position,
- axis C2 (indexed axis of the counter spindle)
- axis Y (Axis Y enables movement of tool perpendicular to axis Z and machining with live tools)
- axis B (indexed support axis)
The machine can be erupted with a measuring tool probe (automatically or manually foldable).
According to the technological operation, turning is focused on processing of:
- Cylindrical surfaces
- Front surfaces
- Conical surfaces
- Threads
There are several hundreds manufacturers in the world, among the most popular in Czech republic are: TOS, MAZAK, DOOSAN, ŠKODA, OKUMA, GILDEMEISTER, HAAS, KOVOSVIT, GOODWAY, TAJMAC-ZPS.
