Clamping area of table | 900x500 mm |
Travel X-axis | 787 mm |
Travel Y-axis | 470 mm |
Travel Z-axis | 533 mm |
Spindle speed | 1 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | BT 40 . |
Machine weight | 4200 kg |
Max. load of table | 450 kg |
Diameter of working spindle | 69 mm |
Max. tool weight | 7 kg |
Subject to change of technical parameters.
The machine is in a good technical condition. Under power. It can be tested.
YOM: | 2011 |
Control system | YES |
Control system Hurco | UltiMax |
Clamping area of table | 198 mm |
Travel X-axis | 533 mm |
Travel Y-axis | 406 mm |
Travel Z-axis | 483 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 5 |
Cooling through spindle | NO |
Spindle taper | CAT 40 . |
Main motor power | 8.9 kW |
Max. load of table | 150 kg |
Tool magazine | YES |
Number of positions in magazine | 20 |
Machine dimensions l x w x h | 2994 x 2666 x 2669 mm |
Machine weight | 3360 kg |
YOM: | 2007 |
Control system | YES |
Clamping area of table | 1200 x 510 mm |
Travel X-axis | 1020 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 525 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Max. load of table | 700 kg |
Number of positions in magazine | 20 |
Main motor power | 25 kW |
Machine dimensions l x w x h | 2810 x 1895 x 2940 mm |
Machine weight | 4800 kg |
YOM: | 2007 |
Control system | YES |
Clamping area of table | 1200 x 510 mm |
Travel X-axis | 1020 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 525 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Max. load of table | 700 kg |
Number of positions in magazine | 20 |
Main motor power | 25 kW |
Machine dimensions l x w x h | 2810 x 1895 x 2940 mm |
Machine weight | 4800 kg |
YOM: | 2008 |
Control system | YES |
Control system Siemens | Sinumerik 810 |
Clamping area of table | 790 x 560 mm |
Travel X-axis | 635 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 460 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | SK 40 . |
Tool magazine | YES |
Number of positions in magazine | 20 |
Rapid feed | 30 m/min |
Machine dimensions l x w x h | 3500x4000x2700 mm |
Machine weight | 4500 kg |
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 600x1000 mm |
Travel X-axis | 630 mm |
Travel Y-axis | 560 mm |
Travel Z-axis | 560 mm |
Spindle speed | 0 - 12000 /min. |
Number of driven axes | 5 |
Cooling through spindle | YES |
Spindle taper | HSK 63 . |
Table diameter | 600 mm |
Number of positions in magazine | 24 |
Main motor power | 15/10 kW |
Max. weight of workpiece | 500 kg |