Clamping area of table | 920x380 mm |
Travel X-axis | 505 mm |
Travel Y-axis | 355 mm |
Travel Z-axis | 610 mm |
Spindle speed | 18000 - /min. |
Spindle taper | SK 30 . |
Number of driven axes | 5 |
Main motor power | 5,6/8,4 kW |
Machine dimensions l x w x h | 2000x2000x2500 mm |
Machine weight | 3200 kg |
Control system Heidenhain | TNC 426 |
Cooling through spindle |
Subject to change of technical parameters.
Very good technical condition, can be tested after agreement. Heidenhain iTNC 530 control system with hand wheel. 5 controlled axis (X, Y, Z, B, C). ATS 160 CNC B axis:5-108 degree, C axis: 360 degree. ATC 24. Accessories: tool sonde, material sonde, chip conveyor, tools, holders, external tool cooling system, documentation.
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 1300 x 600 mm |
Travel X-axis | 1016 mm |
Travel Y-axis | 610 mm |
Travel Z-axis | 660 mm |
Spindle speed | 0 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Machine dimensions l x w x h | 3080 x 2700 x 2800 mm |
Machine weight | 5500 kg |
YOM: | 2008 |
Control system | YES |
Control system Siemens | Sinumerik 810 |
Clamping area of table | 790 x 560 mm |
Travel X-axis | 635 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 460 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | SK 40 . |
Tool magazine | YES |
Number of positions in magazine | 20 |
Rapid feed | 30 m/min |
Machine dimensions l x w x h | 3500x4000x2700 mm |
Machine weight | 4500 kg |
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 500 x 950 mm |
Travel X-axis | 800 mm |
Travel Y-axis | 500 mm |
Travel Z-axis | 500 mm |
Spindle speed | 1 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | ISO 40 . |
Max. load of table | 450 kg |
Main motor power | 7,5 kW |
Tool magazine | YES |
Number of positions in magazine | 24 |
Machine dimensions l x w x h | 2700 x 2450 x 3050 mm |
Machine weight | 6500 kg |
YOM: | 2008 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 1300 x 600 mm |
Travel X-axis | 1016 mm |
Travel Y-axis | 610 mm |
Travel Z-axis | 710 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Machine weight | 5500 kg |
YOM: | 2002 |
Control system | YES |
Control system Fanuc | |
Clamping area of table | 1380x620 mm |
Travel X-axis | 1200 mm |
Travel Y-axis | 600 mm |
Travel Z-axis | 600 mm |
Spindle speed | 50 - 10000 /min. |
Number of driven axes | 4 |
Cooling through spindle | YES |
Pressure of cooling | 30 bar |
Spindle taper | ISO 40 . |