+420 778 547 838 
info@fermat.cz
Français 
L'italiano 
Magyar 
Deutsch 
Polski 
Română 
Русский 
Español 
Čeština 
123 List Grid
123Lathes CNC multi-axis
| Name of a product | Inventory number | Producer | YOM | Parameters | ||
|---|---|---|---|---|---|---|
 |
Cincom L 32 |
231015 | Citizen | 2016 | Turn table diameter: 1.28 in Turning lenght: 12.8 in Sloping bed: NO Y axis: YES Counterspindle: YES Spindle bore: 0.48 in |
|
 |
LB 3000 EX II |
231553 | Okuma Corporation | 2017 | Control system OKUMA: OSP-P300LA Turn table diameter: 23.2 in Turning lenght: 38 in Sloping bed: YES Y axis: YES Travel Y-axis (lathe): 4.8 in |
|
 |
Genos L3000-e |
231360 | Okuma Corporation | 2017 | Control system OKUMA: OSP-P300LA-e Turn table diameter: 12 in Turning lenght: 18 in Sloping bed: YES Y axis: NO Counterspindle: NO |
|
 |
LB 3000 EX II |
231554 | Okuma Corporation | 2017 | Control system OKUMA: OSP-P300LA Turn table diameter: 23.2 in Turning lenght: 38 in Sloping bed: YES Y axis: YES Travel Y-axis (lathe): 4.8 in |
|
 |
LB 3000 EX II |
241242 | Okuma Corporation | 2017 | Control system OKUMA: OSP-P300LA Turn table diameter: 23.2 in Turning lenght: 38 in Sloping bed: YES Y axis: NO Counterspindle: NO |
|
 |
TC600 65MC |
241237 | Spinner | 2021 | Control system Fanuc: Fanuc 32i Turn table diameter: 10 in Turning lenght: 24 in Sloping bed: YES Y axis: NO Counterspindle: NO |
|
 |
Mori-Say 620 AC |
241487 | TAJMAC-ZPS, a.s. | 2021 | Control system Siemens: Simatic S7 Turn table diameter: 0.8 in Turning lenght: 4 in Sloping bed: YES Y axis: YES Counterspindle: YES |
|
 |
ST 30 Y |
231845 | Haas Automation | 2022 | Control system Haas: Turn table diameter: 18.28 in Turning lenght: 23.36 in Sloping bed: YES Y axis: YES Travel Y-axis (lathe): 0 - 2.04 in |
|
 |
DS - 30Y |
241412 | Haas Automation | 2023 | Control system Haas: Turn table diameter: 13.96 in Turning lenght: 23.36 in Sloping bed: YES Y axis: YES Travel Y-axis (lathe): 2.04 in |
In most cases, multi-axis lathes are on inclined beds and linear guideways. In these lathes, in addition to the X and Z axes, there are also the C and Y axes, and in the case of a counter spindle, the C1 and Z1 axes, or in the case of a guided tailstock, the Z1 axis. The turret head is equipped with at least one position for driven tools, not infrequently these lathes are equipped with two such heads.
