Name of a product | Inventory number | Producer | YOM | Parameters | ||
---|---|---|---|---|---|---|
LB 3000 EX II - MYW 450 |
241314 | Okuma Corporation | 2015 | Control system OKUMA: OSP-P300LA Turn table diameter: 580 mm Turning lenght: 500 mm Sloping bed: YES Y axis: YES Travel Y-axis (lathe): 115 mm |
||
GMX 200 linear |
241348 | Gildemeister | 2004 | Control system Siemens: Sinumerik 840 D Turn table diameter: 560 mm Turning lenght: 1070 mm Sloping bed: YES Y axis: YES Travel Y-axis (lathe): +- 80 mm |
||
Delta 20/4 |
241372 | Tornos Bechler | 2011 | Control system Fanuc: 0i - TD Turn table diameter: 20 mm Turning lenght: 170 mm Sloping bed: NO Y axis: YES Counterspindle: YES |
||
Delta 20/4 |
241373 | Tornos Bechler | 2013 | Control system Fanuc: 0i - TD Turn table diameter: 20 mm Turning lenght: 170 mm Sloping bed: NO Y axis: YES Counterspindle: YES |
||
DS - 30Y |
241412 | Haas Automation | 2023 | Control system Haas: Turn table diameter: 349 mm Turning lenght: 584 mm Sloping bed: YES Y axis: YES Travel Y-axis (lathe): 51 mm |
||
CTX alpha 500 |
241453 | DMG MORI | 2009 | Control system Siemens: Sinumerik 840D Sl Turn table diameter: 500 mm Turning lenght: 780 mm Sloping bed: YES Y axis: YES Travel Y-axis (lathe): 190 mm |
||
DECO 2000/20 |
241454 | Tornos Bechler | 1998 | Control system Fanuc: Turn table diameter: 20 mm Turning lenght: 180 mm Sloping bed: YES Y axis: YES Travel Y-axis (lathe): 100 mm |
||
Mori-Say 620 AC |
241487 | TAJMAC-ZPS, a.s. | 2021 | Control system Siemens: Simatic S7 Turn table diameter: 20 mm Turning lenght: 100 mm Sloping bed: YES Y axis: YES Counterspindle: YES |
||
FBL 400 C |
241490 | Macmatic | 2015 | Control system Mitsubishi: M 70 V Turn table diameter: 600 mm Turning lenght: 3000 mm Sloping bed: NO Y axis: NO Counterspindle: NO |
In most cases, multi-axis lathes are on inclined beds and linear guideways. In these lathes, in addition to the X and Z axes, there are also the C and Y axes, and in the case of a counter spindle, the C1 and Z1 axes, or in the case of a guided tailstock, the Z1 axis. The turret head is equipped with at least one position for driven tools, not infrequently these lathes are equipped with two such heads.