YOM:2012
Control system Fanuc: 0i Mate - TD
Turn table diameter: 6.8 in
Turning lenght: 7.4 in
Sloping bed: YES
Spindle bore: 3 in
Turret head: NO
YOM:2007
Control system Siemens: Sinumerik 840 D
Turn table diameter: 24 in
Turning lenght: 48 in
Sloping bed: YES
Spindle bore: 3.6 in
Turret head: YES
YOM:2003
Control system Fanuc: Series 0i
Turn table diameter: 12.4 in
Turning lenght: 18 in
Sloping bed: YES
Spindle bore: 3.08 in
Turret head: YES
YOM:2017
Control system Fanuc: i Series
Turn table diameter: 14 in
Turning lenght: 13.2 in
Sloping bed: YES
Spindle bore: 2.6 in
Turret head: YES
YOM:2011
Control system Fanuc: i Series
Turn table diameter: 18 in
Turning lenght: 30 in
Sloping bed: YES
Spindle bore: 3.04 in
Turret head: YES
YOM:2018
Control system Fanuc: i Series
Turn table diameter: 10.2 in
Turning lenght: 26.32 in
Sloping bed: YES
Spindle bore: 3.4 in
Turret head: NO
YOM:2015
Control system Fanuc: i Series
Turn table diameter: 21 in
Turning lenght: 31.6 in
Sloping bed: YES
Spindle bore: 4.08 in
Turret head:
YOM:2013
Control system Fanuc: i Series
Turn table diameter: 15.6 in
Turning lenght: 22.48 in
Sloping bed: YES
Spindle bore: 2.6 in
Turret head: YES
YOM:2006
Control system Fanuc:
Turn table diameter: 11.6 in
Turning lenght: 20.4 in
Sloping bed: YES
Spindle bore: 2.44 in
Turret head: YES
YOM:2010
Control system Fagor:
Turn table diameter: 22 in
Turning lenght: 120 in
Sloping bed: NO
Spindle bore: 6.4 in
Turret head: NO
YOM:2009
Control system Fagor:
Turn table diameter: 31.6 in
Turning lenght: 80 in
Sloping bed: YES
Swing over bed: 22 in
Swing over cross slide: 12.4 in
YOM:2011
Control system Fagor:
Turn table diameter: 31.6 in
Turning lenght: 60 in
Sloping bed: NO
Spindle bore: 3.28 in
Turret head:
YOM:2001
Control system Heidenhain: CNC Pilot 4290
Turn table diameter: 8.4 in
Turning lenght: 14 in
Sloping bed: NO
Spindle bore: 2.2 in
Turret head: YES
Control system Heidenhain: Manual Plus 3110
Turn table diameter: 12.8 in
Turning lenght: 30 in
Sloping bed: NO
Spindle bore: 2 in
Turret head: NO
YOM:2021
Control system Fanuc: 0i-TF
Turn table diameter: 8 in
Turning lenght: 11.6 in
Sloping bed: YES
Spindle bore: 1.8 in
Turret head: YES
YOM:2010
Control system Fanuc: 0i - TC
Turn table diameter: 13.2 in
Turning lenght: 24 in
Sloping bed: YES
Spindle bore: 2.64 in
Turret head: YES
YOM:2010
Control system Haas:
Turn table diameter: 13.96 in
Turning lenght: 33.04 in
Sloping bed: YES
Spindle bore: 3.52 in
Turret head: YES
YOM:2020
Control system Haas:
Turn table diameter: 13.96 in
Turning lenght: 33.04 in
Sloping bed: YES
Spindle bore: 3.52 in
Turret head: YES
YOM:2007
Control system Haas:
Turn table diameter: 9.64 in
Turning lenght: 20.32 in
Sloping bed: YES
Spindle bore: 3.04 in
Turret head: YES
YOM:2019
Control system Haas:
Turn table diameter: 21.32 in
Turning lenght: 63.52 in
Sloping bed: YES
Spindle bore: 3.04 in
Turret head: YES
YOM:2004
Control system Haas:
Turn table diameter: 9.64 in
Turning lenght: 20.32 in
Sloping bed: YES
Spindle bore: 3.04 in
Turret head: YES
YOM:2016
Control system Haas:
Turn table diameter: 14.24 in
Turning lenght: 16.24 in
Sloping bed: YES
Spindle bore: 2.56 in
Turret head: YES
YOM:2012
Control system Haas:
Turn table diameter: 9.64 in
Turning lenght: 20.32 in
Sloping bed: YES
Spindle bore: 3.04 in
Turret head: YES
YOM:2005
Control system Fanuc: SV
Turn table diameter: 11.36 in
Turning lenght: 16.24 in
Sloping bed: YES
Spindle bore: 2 in
Turret head: YES
YOM:2007
Control system Fanuc: Fanuc 21i
Turn table diameter: 21.6 in
Turning lenght: 21.4 in
Sloping bed: YES
Spindle bore: 2.6 in
Turret head: YES
The regular lathe consists of following parts: beds, spindle, support, tailstock spindle or sliding gearbox.
Clamping part – it is usually formed by a chuck on one side and tailstock on the other, or a chuck and second clamping part by a counter spindle.
Cutting part – formed by a cutting wedge attached to the longitudinal part - the Z axis.
The transverse part (perpendicular to the axis of the spindle) designated as the X-axis, or the automatic tool head, also usually located on the transverse feed on the machine.
The machine can be erupted with a measuring tool probe (automatically or manually foldable).