+420 778 547 838 info@fermat.cz
Close
Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A
Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A

Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A

  • Inventory number 191457
  • Machine type W 100 A
  • Producer TOS Varnsdorf
Diameter of working spindle100 mm
Travel X-axis1600 mm
Travel Y-axis1120 mm
Spindle speed7 - 1120 /min.
Cooling through spindleNO
Spindle travel - W axis900 mm
Travel Z-axis1250 mm
Tool magazineNO
Spindle taperISO 50 .
Max. load of table3000 kg
Machine dimensions l x w x h6710 x 3450 x 3000 mm
Machine weight14000 kg
Main motor power11 kW
Total input17 kVA
Clamping area of table1250 x 1250 mm
Face plate diameter600 mm
Max. diameter of face turning900 mm

Subject to change of technical parameters.


Description

Machine is overhauled.
Hand-controlling horizontal borer machine with fixed stand and cross-adjustable table. The machine is in the following version: X, Z, Y ground, traverse milled and undercut, more precisely glued with special material with sliding properties (Turcite, GS-super fluid, etc.), wedges ground and scraped. The worktable surface is grinded and scraped (reinovation of grooves as required). The X and Y axes are equipped with trapezoidal screws with nuts - placed in bearing housings. Headstock - Gearwheel bearings from reputable manufacturers, main place as well as main spindle manufacturing by Fermat, hydraulic tool clamping. Automatic lubrication is controlled centrally through the dispensers - the manufacturer Hytos. The machine has a telescopic covering of X- and Z axes. Machine surface adjustment - varnish according to RAL 5010 (blue – depending on customer´s wish). Electrical switchboard with programmable controller, control panel on headstock. CE cable lines are installed throughout the machine and between the machine and the electrical cabinets. The machine is equipped with digital measuring with linear rulers with accuracy of positioning indication 0.01mm for axes (X, Y, Z, W) including measuring of the round table by rotary sensor (in the center of the table). Optical reading of the angle after complete overhaul.

video
video

Similar machines

W 100 A
YOM: 1995
Control systemNO
Diameter of working spindle100 mm
Travel X-axis1600 mm
Travel Y-axis1120 mm
Spindle speed0 - 1120 /min.
Cooling through spindleNO
Spindle travel - W axis900 mm
Travel Z-axis1250 mm
Tool magazineNO
Spindle taperISO 50 .
Clamping area of table1250 x 1250 mm
Main motor power11 kW
Max. weight of workpiece3000 kg
Total input15 kVA
Machine dimensions l x w x h6710 x 3450 x 3000 mm
Machine weight14000 kg

W 100 A
TOS Varnsdorf
Inventory number: 251737
W 100 A
YOM: 1992
Control systemNO
Diameter of working spindle100 mm
Travel X-axis1500 mm
Travel Y-axis1250 mm
Spindle speed7 - 1120 /min.
Cooling through spindleNO
Spindle travel - W axis mm
Travel Z-axis1800 mm
Tool magazineNO
Spindle taperISO 50 .
Clamping area of rotary table1200x1200 mm

W 100 A
TOS Varnsdorf
Inventory number: 241881
WFT 13 CNC
YOM: 2016
Control systemYES
Control system HeidenhainTNC 530
Diameter of working spindle130 mm
Travel X-axis4000 mm
Travel Y-axis2000 mm
Spindle speed10 - 3000 /min.
Cooling through spindleYES
Pressure of cooling20 bar
Spindle travel - W axis730 mm
Travel Z-axis1500 mm
Tool magazineYES
Number of positions in magazine40
Spindle taperISO 50 .
Table dimensions1800x2200 mm
Main motor power41 kW

WFT 13 CNC
Fermat
Inventory number: 251488
W 100 A
YOM: 2009
Control systemNO
Diameter of working spindle100 mm
Travel X-axis1600 mm
Travel Y-axis1120 mm
Spindle speed0 - 1200 /min.
Cooling through spindleNO
Spindle travel - W axis900 mm
Travel Z-axis1250 mm
Tool magazineNO
Spindle taperSK 50 .

W 100 A
RETOS VARNSDORF s.r.o.
Inventory number: 242098
W 100 A
YOM: 2004
Control systemNO
Diameter of working spindle100 mm
Travel X-axis1600 mm
Travel Y-axis1120 mm
Spindle speed0 - 1120 /min.
Cooling through spindleNO
Spindle travel - W axis900 mm
Travel Z-axis1250 mm
Tool magazineNO
Spindle taperISO 50 .
Clamping area of table1250 x 1250 mm
Main motor power11 kW
Max. weight of workpiece3000 kg
Total input15 kVA
Machine dimensions l x w x h6710 x 3450 x 3000 mm
Machine weight14000 kg

W 100 A
TOS Varnsdorf
Inventory number: 251853