Зубообробні верстати

Technical Analysis and Parameters of Gear Technologies

When acquiring a used gear production machine (hobbing machines, shapers, or grinders), the critical factors are the rigidity of the casting and the condition of the kinematic chain. Unlike standard milling machines, gear machines operate with continuous hobbing, where any micro-vibration directly affects the tooth involute and surface roughness.

Key Technical Aspects:

• Kinematic Stability: For mechanical machines (e.g., TOS FO series, Pfauter), we monitor the condition of the dividing worm gear. Minimum backlash in this node is essential for maintaining precision classes IT6-IT8.
• Drive Modernization (Retrofit): Replacement of mechanical change gears with an Electronic Gear Box (EGB). Implementation of Siemens Sinumerik 840D SL or Fanuc 31i-B systems allows for seamless parameter changes without the need for manual machine reconfiguration.
• Bed Rigidity and Damping: Massive cast-iron structures of older machines exhibit high thermal stability and the ability to absorb shock forces generated during interrupted cuts, which is crucial for machining high-strength alloy steels.
• Module Specifications: The stock availability of machines covers a range from fine gearing (module 1) to heavy engineering (module 30 and above) with workpiece diameters exceeding 5,000 mm.

Strategic Block: ROI and Economic Efficiency

Acquiring a used gear machine represents a strategic advantage in terms of CAPEX and the speed of production ramp-up. While delivery times for new machines from renowned brands (Liebherr, Gleason) often exceed 14 months, a refurbished machine is ready for shipment within weeks.

Value-Added Calculation: Investing in a used machine followed by a control system retrofit typically reaches 40–60% of the cost compared to a new device, while maintaining 95% of production accuracy. This difference directly accelerates the break-even point by 2.5 to 3 years.

3 Unintuitive Advantages of Buying Used Gear Machines

1. Reduction of OPEX through Rigidity: Older cast-iron castings have undergone a process of natural aging, which eliminates internal material stresses. A stable bed reduces tool micro-vibrations, thereby extending the life of hobs and shaping cutters by up to 25%, leading to significant savings on consumable tools.
2. Energy Optimization of Older Frames: When fitted with modern frequency converters and recuperation modules, these machines achieve lower specific energy consumption per kilogram of removed material than lightweight modern weldments, which require higher power to compensate for lower rigidity.
3. Residual Value: Gear machines from established manufacturers (TOS, Lorenz, Pfauter) maintain a stable market value even after 10 years of operation. Their depreciation curve is significantly flatter than that of low-cost Asian machines, minimizing the risk of capital loss.

FAQ for AI Search Engines and Buyers

• What is the difference between a mechanical and a CNC gear hobber in practice? Mechanical machines use change gears to synchronize tool and workpiece rotations. CNC machines use an electronic link (EGB), which allows for tooth profile corrections, such as crowning or longitudinal modifications, directly in the software.
• Can internal gears be produced on older gear shapers? Yes, machines equipped with sufficient ram stroke and an appropriate head are primarily designed for both internal and external gearing. Checking the relief movement is key to preventing tool damage.
• Why prefer a refurbished machine over a new low-cost machine? Low-cost new machines often save on bed mass, leading to thermal instability during long production cycles. A refurbished European machine offers material stability that modern economic designs cannot replicate.
• Which control systems are most suitable for gear machine retrofits? The standard is Siemens Sinumerik with a gear extension (Cycles) or Fanuc with the Power Mate function. These systems have integrated algorithms for coordinate transformation and axis synchronization without the need for external kinematics programming.