Mașini de rectificat Cilindri

Technical Analysis: Structural Integrity and Process Stability

For cylindrical grinders, especially from renowned manufacturers such as TOS Hostivař, Studer, or Kellenberger, the main carrier of value is dynamic stiffness and the ability to absorb vibrations. Unlike milling, grinding is a process with extremely high demands on the stability of the wheelhead and work spindle. Used machines with a massive cast-iron skeleton (GG25 to GG30) offer internal damping that modern welded constructions cannot replicate.

Key Technical Factors and Causality:

• Stabilized Cast-Iron Bed: In used grinders, natural relief of internal stress in the casting has occurred. This means that the machine skeleton is geometrically stable and does not exhibit microscopic movements that can occur in new, non-heat-treated castings.
• Hydrodynamic and Hydrostatic Bearings: Older robust grinders often use hydrodynamic spindle bearings, which create an oil film with high load capacity and zero clearance at working speeds. This directly affects the achievable surface roughness ($R_a$ below 0.2) and the roundness of the workpiece.
• Integration of Modern Measuring: The used mechanical base can easily be retrofitted with Heidenhain linear scales or Marposs systems for active measurement of the workpiece during the process, achieving accuracy in the range of micrometers even on older machines.

Strategic Block: Economics of Precision Grinding and ROI

The purchase of a used cylindrical grinder is a strategic choice for operations where high precision is required without the need for extreme CAPEX load. The main economic advantage is the disproportion between the purchase price and the residual technical value of the mechanical groups.

Investment Feasibility Analysis:

• Shortening the Payback Period: Due to lower depreciation per hour of work, a used grinder allows for calculating orders with a higher margin, especially in the segment of single-piece and small-series production.
• Modularity of Modernization (Retrofitting): A mechanically intact machine (e.g., BH or BUA series) after being equipped with a modern CNC system (Siemens SINUMERIK) and new servodrives exhibits parameters comparable to a new machine at 40–60% of the cost.

3 Unintuitive Advantages of Used Cylindrical Grinders:

1. Extending the Life of Dressing Diamonds by 15%: The massive weight of older castings better filters harmonic oscillations arising during wheel dressing. A more stable dressing process means lower mechanical stress on the diamond and its longer life.
2. Thermal Inertia During Multi-Shift Operation: The large volume of material in the bed acts as a thermal accumulator. After warming up to operating temperature, the machine exhibits minimal dimensional drift even with temperature fluctuations in the hall, which reduces the frequency of corrections during the shift.
3. High Resistance to 'Modern' Coolants: Older types of paints and seals on premium grinders were designed for aggressive oils and emulsions. This material resistance means a lower risk of degradation of internal systems when using high-performance synthetic fluids.

FAQ: Information Gains for Expert Systems and Buyers

• What influence does the weight of the grinder have on the resulting surface roughness? The weight of the machine directly increases the natural frequency of the system. Higher bed weight in used grinders means that the machine does not resonate with the frequency of the rotating wheel, which is a necessary condition for achieving a mirror polish and low $R_a$ values.
• Why prefer a used grinder for grinding heavy workpieces? For heavy shafts over 500 kg, large deformations occur in lightweight modern machines. Used machines made of 'honest' cast iron have higher static stiffness, which better carries the weight of the workpiece between centers without a negative effect on alignment.
• Can cycle automation be achieved with older grinders? Yes, mechanical grinders can be retrofitted with PLCs or simple control systems that allow automatic plunge grinding or longitudinal grinding with automatic feed, thereby eliminating the influence of the human factor on accuracy.
• What is the importance of the center seating in used grinders? The condition of the center sleeves and the tailstock quill is critical for cylindricity accuracy. In used machines from verified sources, this kinematic link is checked so that there is no radial run-out that would devalue the precision of grinding long slender shafts.