Control system Siemens | Sinumerik 840D Sl |
Max. diameter of workpiece | 2200 mm |
Clamping diameter of rotary table | 2000 mm |
Max. load of table | 20000 kg |
Max. workpiece height | 1260 mm |
Ram travel (Z) | 1000 mm |
Ram size | 180x200 mm |
Vertical adjustment of traverse | 800 mm |
Tool magazine | YES |
Number of positions in magazine | 15 |
Driven Tools | YES |
Number of tool positions (driven) | 15(15) |
Speed driven tools | 8 - 3300 /min |
Power of driven tools | 22 kW |
Rotations of clamping plate | 2 - 160 /min |
Axis C | 0,003 ° |
Main motor power | 67 kW |
Subject to change of technical parameters.
The machine is in good technical condition, under power, after agreement is possible to test it.
Machine is after complete overhaul and modernization by Fermat.
- regrinding of guide surfaces
- replacement of all rolling nests and washers, new wipers of guide surfaces
- disassembly of the main bearing - and complete overhaul of the bearing at the manufacturer
- inspection and replacement of other bearings, replacement of all ball screws and nuts
- repair of clamping plate (3 jaws chuck) - hydraulic- mechanical chuck of 120 degress plus 3 pcs of manual chucks
- new protective covers of the machine according current CE standarts including safety lock
- replacement of the lubrication system, incl. a new hydraulic unit
- new chip conveyor
- new water management (1000 liters)
- new Sinumerik 840 DSL control system with touchable rittal display OP 15 Black
- handwheel
- new Siemens main drive, new servomotors for X and Z axes
- new rotary encoder speed sensor, new power and signal cables for spindle motors
- new air conditioned electrical cabinet
- coolant pumps control of rotation of 15 position tool magazine via frequency converter
C axis including live tools with its speed in the range from 8 - 3300 rpm via a two-speed Baruffaldi transmission
C axis one way positioning - strengthening units - positioning accuracy tolerance up to 10 angular seconds
Other options and accessories are mentioned more detailed in the offer on request.
YOM: | 1989 |
Control system | YES |
Control system Siemens | Sinumerik 840 D |
Max. diameter of workpiece | 1500 mm |
Clamping diameter of rotary table | 1250 mm |
Max. load of table | 12000 kg |
Max. workpiece height | 1570 mm |
Ram travel (Z) | 1000 mm |
Ram size | 800 mm |
Driven Tools | NO |
Tool magazine | YES |
Number of positions in magazine | 15 |
Face plate diameter | 1250 mm |
Max. ram stroke | 1000 mm |
Max. weight of workpiece | 8000 kg |
Rapid feed | 8000 m/min |
Total input | 63 kVA |
Main motor power | 40 kW |
Machine weight | 22000 kg |
YOM: | 2008 |
Control system | YES |
Control system Siemens | Sinumerik 840 D |
Max. diameter of workpiece | 3000 mm |
Clamping diameter of rotary table | 2800 mm |
Max. load of table | 18000 kg |
Max. workpiece height | 1800 mm |
Ram travel (Z) | 1400 mm |
Ram size | 320 mm |
Driven Tools | NO |
Tool magazine | YES |
Number of positions in magazine | 12 |
Main motor power | 50 kW |
Machine weight | 40000 kg |
Table rotation | 1 - 100 /min |
YOM: | 1978 |
Control system | NO |
Max. diameter of workpiece | 8000 mm |
Clamping diameter of rotary table | 6300 mm |
Max. load of table | 300000 kg |
Max. workpiece height | 5000 mm |
Ram travel (Z) | 2800 mm |
Ram size | mm |
Driven Tools | NO |
Tool magazine | NO |
YOM: | 0 |
Control system | YES |
Control system Tesla | NS 113 |
Max. diameter of workpiece | 1050 mm |
Clamping diameter of rotary table | 780 mm |
Max. load of table | 2000 kg |
Max. workpiece height | 630 mm |
Ram travel (Z) | mm |
Driven Tools | NO |
Tool magazine | NO |
Machine dimensions l x w x h | 2900 x 2000 x 3600mm mm |
Machine weight | 10000 kg |
YOM: | 1972 |
Control system | NO |
Max. diameter of workpiece | 1600 mm |
Clamping diameter of rotary table | 1400 mm |
Max. load of table | 5000 kg |
Max. workpiece height | 1000 mm |
Ram travel (Z) | 700 mm |
Ram size | mm |
Driven Tools | |
Tool magazine | YES |
Number of positions in magazine | 5 |
Main motor power | 30 kW |
Machine dimensions l x w x h | 3380 x 3240 x 4140 mm |
Machine weight | 17800 kg |
Turret head | YES |
Rotations of clamping plate | 4 - 200 /min |