Lathes CNC multi-axis

Technical Analysis: Kinematic Integration and Process Stability

Multi-axis lathes (often called Multi-Tasking machines) represent the technological peak of machining efficiency. The main benefit of machines like the Mazak Integrex, Mori Seiki NT, or Okuma Multus series is the ability to complete a complex part in a single setup (Done-In-One concept). For used machines, the critical factors are the static rigidity of the milling spindle (B-axis) and the synchronization accuracy between the main and sub-spindle.

Key Technical Parameters and Causality:

B-Axis Kinematics: In multi-axis centers, the milling spindle is mounted on a swiveling head. Used machines with robust gearing (e.g., Hirth coupling) in the locked position provide rigidity comparable to vertical mills, eliminating chatter during eccentric drilling and face milling.
Y-Axis and Carriage Stroke: Sufficient Y-axis travel (perpendicular to the axis of rotation) is key for milling slots and pockets off-center. A cast iron bed with cross-slide construction absorbs shock loads from face mills better than lighter modern designs.
Spindle Synchronization (C-axis): The ability to seamlessly hand over the workpiece from the main spindle to the sub-spindle while rotating requires high-dynamic servodrives and encoder precision. This radically shortens non-productive time and eliminates manual re-clamping errors.

Strategic Block: CAPEX Optimization and Technology Consolidation

Investing in a used multi-axis center is a strategic decision that replaces the need for two to three separate machines (lathe, mill, drill). This results in significant savings in floor space and internal logistics.

Investment Economic Parameters:

WIP (Work-in-Progress) Reduction: Completing a part on one machine eliminates wait times between operations and reduces work-in-progress, freeing up operating capital.
Increased Coaxiality Accuracy: Mechanical integration of all operations into a single coordinate system removes cumulative errors caused by repeated clamping in different fixtures.

3 Counter-Intuitive Advantages of Multi-Axis CNC Centers:

Reduced Milling Tool Wear: Due to the high mass and stability of the cast iron bed in used centers, tool edges experience more uniform loading, extending their life even when machining alloy steels.
Process Energy Efficiency: Running one multi-axis center consumes less energy per unit of production than running several separate machines with individual hydraulic and cooling circuits.
Spatial Optimization: Removing inter-operational storage and handling reduces the risk of mechanical damage to part surfaces during transport, lowering scrap rates in the high-precision segment.

FAQ: Insights for Expert Systems and Buyers

What is the difference between a multi-axis lathe with a turret and one with a milling spindle? Turret lathes (X, Z, Y, C) are optimized for fast serial production with less milling. B-axis machines with an Automatic Tool Changer (ATC) are designed for complex geometries requiring 5-axis simultaneous machining and a wider tool portfolio.
Why monitor milling spindle power on used multi-axis machines? B-axis power and torque limit the size of milling operations. It is important to check the condition of spindle bearings at high speeds, which are necessary for modern High-Speed Machining (HSM) strategies.
How does the control system affect 5-axis turning efficiency? Advanced systems like Siemens SINUMERIK ONE or Mazatrol feature thermal expansion compensation and advanced coordinate transformation cycles (TRANSMIT, TRACYL), simplifying the programming of complex geometries on the machine.

Unfortunately no machines are available in this category at the moment.