TNC 640 | |
130 | |
3500 | |
2000 | |
10 - 3000 | |
OUI | |
20 | |
730 | |
1250 | |
NON | |
ISO 50 | |
1800 x 1600 | |
12000 | |
41 | |
7200 x 7600 x 4900 | |
35000 | |
80 |
Sujet au changement de paramètres techniques.
The machine is complete overhauled and modernized. The machine has a modern headstock 3000 rev./minute and a new X bed, slides and table – headstock, X bed, slides and table are made by Fermat.
After the overhaul the machine will be controlled in all X,Y,Z,B axes continuously and will comply with all requirements of CNC controlled machine with the possibility of circular interpolation, screw interpolation, spatial interpolation – curve in a space and linear interpolation in 4 axes.
Geometric protocol, warranty, CE confirmation, operating instructions and all necessary documents.
The exact content of the overhaul will be precisely specified in the sales contract.
Année de production: | 2018 |
OUI | |
0i-MF | |
130 | |
3657 | |
3048 | |
10 - 3000 | |
OUI | |
20 | |
730 | |
1820 | |
OUI | |
40 | |
CAT 50 | |
1524 x 4013 | |
20000 | |
37/45 | |
41730 |
Année de production: | 1969 |
NON | |
100 | |
1600 | |
1120 | |
0 - 1120 | |
NON | |
900 | |
1250 | |
NON | |
ISO 50 | |
1250 x 1250 | |
10 | |
6015 x 3000 x 3000 | |
17500 |
Année de production: | 2014 |
OUI | |
TNC 530 | |
110 | |
2000 | |
2000 | |
10 - 3000 | |
OUI | |
20 | |
730 | |
1250 | |
OUI | |
20 | |
ISO 50 | |
1250x1400 | |
4370 x 3850 x 3600 | |
24050 | |
5000 |
Année de production: | 1998 |
NON | |
100 | |
1600 | |
1120 | |
0 - 1120 | |
NON | |
900 | |
1250 | |
NON | |
ISO 50 | |
1250 x 1250 | |
11 | |
3000 | |
15 | |
6710 x 3450 x 3000 | |
14000 |
Année de production: | 0 |
NON | |
100 | |
1600 | |
1120 | |
7 - 1120 | |
NON | |
900 | |
1250 | |
NON | |
ISO 50 | |
3000 | |
6710 x 3450 x 3000 | |
14000 | |
11 | |
17 | |
1250 x 1250 | |
600 | |
900 |