Bending length | 5000 mm |
Bending power | 400 t |
Table dimensions | 300 x 5000 mm |
Throat | 315 mm |
Main motor power | 37 kW |
Machine dimensions l x w x h | 5900 x 2010 x 3600 mm |
Machine weight | 39 000 kg |
Type of press drive | Hydraulický |
Clearance between columns | 4300 mm |
Shutheight | 545 mm |
Ram stroke | 315 mm |
Subject to change of technical parameters.
Middle repair 2017.
Two year warranty.
new hydraulics, new hydr. elements and safety hydr. blocks.
- recovered chrome plating in cylinders / hydraulic motors /
- New sealing elements in cylinders
- reduced amount of hydr. oil in the bath to 900 l
- Changing the hydraulic system to a more modern and simpler, and thus reduced, power of the main el. engine from 37kW to 22kW
- new el. logic with security circuits according to the current euro. standards
- new el. a switchboard located on the side of the right stand
- control and control of the machine by two-way ELGO P8822 system, 200 program memory, panel on swivel arm
- side guards and rear cover, tracked end. switches
- rear 4-inch motor stop with 600 mm adjustment, measuring 0.1 m
- securing the machine against damage in case of failure of synchronization of the run of the bar
YOM: | 1981 |
Bending power | 50 t |
Bending length | 2500 mm |
Type of press drive | Hydraulický |
Control system | NO |
YOM: | 1976 |
Bending power | 100 t |
Bending length | 3000 mm |
Type of press drive | Hydraulický |
Main motor power | 17 kW |
Machine dimensions l x w x h | 3000 x 1170 x 2410 mm |
Machine weight | 7500 kg |
Control system | NO |
YOM: | 1997 |
Bending power | 80 t |
Bending length | 2500 mm |
Type of press drive | Hydraulický |
Machine dimensions l x w x h | 2500 x 2385 x 1250 mm |
Machine weight | 5 700 kg |
Control system | NO |
YOM: | 1992 |
Bending power | 160 t |
Bending length | 4000 mm |
Type of press drive | Hydraulický |
Main motor power | 16,50 kW |
Machine dimensions l x w x h | 4000 x 1690 x 2630 mm |
Machine weight | 12100 kg |
Control system | NO |
YOM: | 1995 |
Bending power | 250 t |
Bending length | 4000 mm |
Type of press drive | Hydraulický |
Table dimensions | 4000 x 200 mm |
Main motor power | 22 kW |
Machine dimensions l x w x h | 4900 x 1770 x 3250 mm |
Machine weight | 18650 kg |
Control system | NO |