+420 778 547 838 
info@fermat.cz
Français 
L'italiano 
Magyar 
Deutsch 
Polski 
Română 
Русский 
Español 
Čeština 
Milling machines / Table / FBE-3000
-
Inventory number 191809
-
Machine type FBE-3000
-
Producer NCT
-
YOM 2015
| Control system NCT | 201 |
| Dimensions of table working surface | 3100 x 1050 mm |
| Travel X-axis | 3000 mm |
| Travel Y-axis | 1000 mm |
| Travel Z-axis | 1500 mm |
| Rapid feed | 10/10 /10 m/min |
| Machine weight | 14000 kg |
| Max. load of table | 8000 kg |
| Main motor power | 18 kW |
Subject to change of technical parameters.
Description
The machine is in very good condition, only 700 work hours. Under power possible to be tested .
Right angle milling head-two positions: horizontal and vertical position, positioning by software.
Manual can be set from 0*-90* in any angle.
Similar machines
| YOM: | 2019 |
| Control system | YES |
| Control system Heidenhain | TNC 620 |
| Dimensions of table working surface | 3000 mm |
| Travel X-axis | 4000 mm |
| Travel Y-axis | 1500 mm |
| Travel Z-axis | 1500 mm |
| Tool magazine | YES |
| Number of positions in magazine | 60 |
| Spindle taper | ISO 50 . |
| Machine dimensions l x w x h | 11200 x 8140 x 5390 mm |
| Machine weight | 50 000 kg |
VH PLUS 4000 MGM
CORREANAYAK
Inventory number: 231909
| YOM: | 2004 |
| Control system | YES |
| Control system Heidenhain | TNC 530 |
| Dimensions of table working surface | 3500x1300 mm |
| Travel X-axis | 3000 mm |
| Travel Y-axis | 1200 mm |
| Travel Z-axis | 1500 mm |
| Working feed | 6000 mm/min |
| Rapid feed | 15 m/min |
| Spindle speed | 0 - 2800 /min. |
| Tool magazine | YES |
| Number of positions in magazine | 60 |
| Spindle taper | ISO 50 . |
| Diameter of working spindle | 130 mm |
LEM 936
FPT INDUSTRIE S.p.A.
Inventory number: 241936
| YOM: | 0 |
| Control system | YES |
| Control system Selca | S3000 CNC |
| Dimensions of table working surface | 2000 x 700 mm |
| Travel X-axis | 1500 mm |
| Travel Y-axis | 700 mm |
| Travel Z-axis | 700 mm |
| Main motor power | 30 kW |
| Machine weight | 16000 kg |
| Spindle taper | ISO 40 . |
FS 110 CNC
DROOP & REIN
Inventory number: 241070
| YOM: | 2002 |
| Control system | YES |
| Control system Acramatic | 2100 CNC |
| Dimensions of table working surface | 3700x800 mm |
| Travel X-axis | 3700 mm |
| Spindle speed | 0 - 5000 /min. |
| Spindle taper | SK 50 . |
| Cooling through spindle | YES |
FTV 850
CINCINNATI MACHINES
Inventory number: 221212
| YOM: | 2000 |
| Control system | YES |
| Control system Heidenhain | TNC 426 |
| Dimensions of table working surface | 3000 x 1000 mm |
| Travel X-axis | 3000 mm |
| Travel Y-axis | 1400 mm |
| Travel Z-axis | 1000 mm |
| Spindle taper | ISO 50 . |
| Spindle speed | 11 - 2500 /min. |
| Number of positions in magazine | 40 |
| Main motor power | 22/27,5 kW |
