Control system Heidenhain | TNC 530 |
Clamping area of table | 20 x 38 in |
Travel X-axis | 32 in |
Travel Y-axis | 20 in |
Travel Z-axis | 20 in |
Spindle speed | 1 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | ISO 40 . |
Max. load of table | 450 kg |
Main motor power | 7,5 kW |
Tool magazine | YES |
Number of positions in magazine | 24 |
Machine dimensions l x w x h | 108 x 98 x 122 in |
Machine weight | 6500 kg |
Subject to change of technical parameters.
The machine is in good technical condition, under power, after agreement is possible to test it.
TWINARM pneumatic tool magazine for 24 tools.
Conveyor conveyor / trolley - fine chips - with scraper.
HEIDENHAIN TT140 tool probe.
Electronic handwheel HR410 with cable CE machine design.
Full coverage of the machine including the top cover and halogen lighting of the machine.
Telescopic covers of all axes.
Automatic central oil lubrication.
Electrical cabinet with fan and machine wiring for operating voltage 400V/50Hz.
Programmable blowing.
RS 232 port.
Light signaling of the end of the program.
Network card for Ethernet.
Synchronous threading.
Automatic machine shutdown.
Currently after: Z-axis ball screw overhaul, electrical check. Z axis motor.
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 1300 x 600 mm |
Travel X-axis | 1016 mm |
Travel Y-axis | 610 mm |
Travel Z-axis | 660 mm |
Spindle speed | 0 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Machine dimensions l x w x h | 3080 x 2700 x 2800 mm |
Machine weight | 5500 kg |
YOM: | 2008 |
Control system | YES |
Control system Siemens | Sinumerik 810 |
Clamping area of table | 790 x 560 mm |
Travel X-axis | 635 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 460 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | SK 40 . |
Tool magazine | YES |
Number of positions in magazine | 20 |
Rapid feed | 30 m/min |
Machine dimensions l x w x h | 3500x4000x2700 mm |
Machine weight | 4500 kg |
YOM: | 2021 |
Control system | YES |
Control system Heidenhain | TNC 640 |
Clamping area of table | 1420 x 500 mm |
Travel X-axis | 1270 mm |
Travel Y-axis | 520 mm |
Travel Z-axis | 610 mm |
Spindle speed | 1 - 12000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Pressure of cooling | 20 bar |
Spindle taper | ISO 50 . |
Tool magazine | YES |
Number of positions in magazine | 40 |
YOM: | 2016 |
Control system | YES |
Control system Mazatrol | MATRIX 2 |
Clamping area of table | 1300x550 mm |
Travel X-axis | 1050 mm |
Travel Y-axis | 530 mm |
Travel Z-axis | 510 mm |
Spindle speed | 10 - 12000 /min. |
Number of driven axes | 4 |
Cooling through spindle | YES |
Pressure of cooling | 15 bar |
Spindle taper | ISO 40 . |
Max. load of table | 1200 kg |
Tool magazine | YES |
Number of positions in magazine | 30 |
Machine weight | 7700 kg |
YOM: | 1999 |
Control system | YES |
Control system Siemens | Sinumerik 840 C |
Clamping area of table | 6300 x 680 mm |
Travel X-axis | 6300 mm |
Travel Y-axis | 660 mm |
Travel Z-axis | 800 mm |
Spindle speed | 0 - 10500 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 50 . |
Machine weight | 26000 kg |
Machine dimensions l x w x h | 10000x2850x3300 mm |
Tool magazine | YES |
Number of positions in magazine | 40 |
Total input | 36 kVA |