Control system Fanuc | 18i - MB5 |
Clamping area of table | 1320 - 620 mm |
Travel X-axis | 1050 mm |
Travel Y-axis | 640 mm |
Travel Z-axis | 800 mm |
Spindle speed | 0 - 8000 /min. |
Number of driven axes | 4 |
Cooling through spindle | YES |
Pressure of cooling | 25-70 bar |
Spindle taper | ISO 50 . |
Max. weight of workpiece | 1350 kg |
Machine weight | 6900 kg |
Subject to change of technical parameters.
The machine is in good technical condition, under power, after agreement is possible to test it. Regular service. Laser compensation of X and Y axes was performed on the machine in 2021, ball bar available.
Accessories: chip ejector, Nikken series CNC260B rotary table and support bearing, 70 bar high pressure pump, air cooling, additional plate, MP12 workpiece probe.
Repair in 2022 worth €10,000 - repair of two screws, GO spindle, repair of x,y movements.
YOM: | 2008 |
Control system | YES |
Control system Siemens | Sinumerik 810 |
Clamping area of table | 790 x 560 mm |
Travel X-axis | 635 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 460 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | SK 40 . |
Tool magazine | YES |
Number of positions in magazine | 20 |
Rapid feed | 30 m/min |
Machine dimensions l x w x h | 3500x4000x2700 mm |
Machine weight | 4500 kg |
YOM: | 2007 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 1200 x 510 mm |
Travel X-axis | 1020 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 525 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Max. load of table | 700 kg |
Number of positions in magazine | 20 |
Main motor power | 25 kW |
Machine dimensions l x w x h | 2810 x 1895 x 2940 mm |
Machine weight | 5200 kg |
YOM: | 2007 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 1200 x 510 mm |
Travel X-axis | 1020 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 525 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Max. load of table | 700 kg |
Number of positions in magazine | 20 |
Main motor power | 25 kW |
Machine dimensions l x w x h | 2810 x 1895 x 2940 mm |
Machine weight | 5200 kg |
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 600x1000 mm |
Travel X-axis | 630 mm |
Travel Y-axis | 560 mm |
Travel Z-axis | 560 mm |
Spindle speed | 0 - 12000 /min. |
Number of driven axes | 5 |
Cooling through spindle | YES |
Spindle taper | HSK 63 . |
Table diameter | 600 mm |
Number of positions in magazine | 24 |
Main motor power | 15/10 kW |
Max. weight of workpiece | 500 kg |
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 1300 x 600 mm |
Travel X-axis | 1016 mm |
Travel Y-axis | 610 mm |
Travel Z-axis | 660 mm |
Spindle speed | 0 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Machine dimensions l x w x h | 3080 x 2700 x 2800 mm |
Machine weight | 5500 kg |