Control system Haas | |
Clamping area of table | 500 mm |
Travel X-axis | 762 mm |
Travel Y-axis | 508 mm |
Travel Z-axis | 508 mm |
Spindle speed | 0 - 8100 /min. |
Number of driven axes | 5 |
Cooling through spindle | YES |
Pressure of cooling | 69 bar |
Spindle taper | BT 40 . |
Max. weight of workpiece | 300 kg |
Tool magazine | YES |
Number of positions in magazine | 40+1 |
Machine dimensions l x w x h | 3990 x 2340 x 2570 mm |
Machine weight | 8664 kg |
Subject to change of technical parameters.
The machine is in good technical condition, under power, after agreement is possible to test it.
YOM: | 2008 |
Control system | YES |
Control system Siemens | Sinumerik 810 |
Clamping area of table | 790 x 560 mm |
Travel X-axis | 635 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 460 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | SK 40 . |
Tool magazine | YES |
Number of positions in magazine | 20 |
Rapid feed | 30 m/min |
Machine dimensions l x w x h | 3500x4000x2700 mm |
Machine weight | 4500 kg |
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 1300 x 600 mm |
Travel X-axis | 1016 mm |
Travel Y-axis | 610 mm |
Travel Z-axis | 660 mm |
Spindle speed | 0 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Machine dimensions l x w x h | 3080 x 2700 x 2800 mm |
Machine weight | 5500 kg |
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 500 x 950 mm |
Travel X-axis | 800 mm |
Travel Y-axis | 500 mm |
Travel Z-axis | 500 mm |
Spindle speed | 1 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | ISO 40 . |
Max. load of table | 450 kg |
Main motor power | 7,5 kW |
Tool magazine | YES |
Number of positions in magazine | 24 |
Machine dimensions l x w x h | 2700 x 2450 x 3050 mm |
Machine weight | 6500 kg |
YOM: | 2021 |
Control system | YES |
Control system Heidenhain | TNC 640 |
Clamping area of table | 1420 x 500 mm |
Travel X-axis | 1270 mm |
Travel Y-axis | 520 mm |
Travel Z-axis | 610 mm |
Spindle speed | 1 - 12000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Pressure of cooling | 20 bar |
Spindle taper | ISO 50 . |
Tool magazine | YES |
Number of positions in magazine | 40 |
YOM: | 2016 |
Control system | YES |
Control system Mazatrol | MATRIX 2 |
Clamping area of table | 1300x550 mm |
Travel X-axis | 1050 mm |
Travel Y-axis | 530 mm |
Travel Z-axis | 510 mm |
Spindle speed | 10 - 12000 /min. |
Number of driven axes | 4 |
Cooling through spindle | YES |
Pressure of cooling | 15 bar |
Spindle taper | ISO 40 . |
Max. load of table | 1200 kg |
Tool magazine | YES |
Number of positions in magazine | 30 |
Machine weight | 7700 kg |