Control system Heidenhain | TNC 530 |
Clamping area of table | 3200 x 1100 mm |
Travel X-axis | 2600 mm |
Travel Y-axis | 1100 mm |
Travel Z-axis | 900 mm |
Spindle speed | 20 - 8000 /min. |
Number of driven axes | 4 |
Cooling through spindle | YES |
Pressure of cooling | 40 bar |
Spindle taper | SK40 . |
Tool magazine | YES |
Number of positions in magazine | 30 |
Machine weight | 26850 kg |
Subject to change of technical parameters.
The machine is in good technical condition, under power, after agreement is possible to test it. 3D control iTNC 530 HSCI.
Full cab, coolant tank, direct metering systems, chip conveyor.
Replaced spindle, ball screws on X and Z axis, linear guides on X and Z axis.
Digital measuring probe.
Spindle runout - 0.006mm.
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 1300 x 600 mm |
Travel X-axis | 1016 mm |
Travel Y-axis | 610 mm |
Travel Z-axis | 660 mm |
Spindle speed | 0 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Spindle taper | ISO 40 . |
Machine dimensions l x w x h | 3080 x 2700 x 2800 mm |
Machine weight | 5500 kg |
YOM: | 2008 |
Control system | YES |
Control system Siemens | Sinumerik 810 |
Clamping area of table | 790 x 560 mm |
Travel X-axis | 635 mm |
Travel Y-axis | 510 mm |
Travel Z-axis | 460 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | SK 40 . |
Tool magazine | YES |
Number of positions in magazine | 20 |
Rapid feed | 30 m/min |
Machine dimensions l x w x h | 3500x4000x2700 mm |
Machine weight | 4500 kg |
YOM: | 2005 |
Control system | YES |
Control system Heidenhain | TNC 530 |
Clamping area of table | 500 x 950 mm |
Travel X-axis | 800 mm |
Travel Y-axis | 500 mm |
Travel Z-axis | 500 mm |
Spindle speed | 1 - 8000 /min. |
Number of driven axes | 3 |
Cooling through spindle | NO |
Spindle taper | ISO 40 . |
Max. load of table | 450 kg |
Main motor power | 7,5 kW |
Tool magazine | YES |
Number of positions in magazine | 24 |
Machine dimensions l x w x h | 2700 x 2450 x 3050 mm |
Machine weight | 6500 kg |
YOM: | 2010 |
Control system | YES |
Control system FADAL | Fadal 88 CNC Control |
Clamping area of table | mm |
Travel X-axis | 1524 mm |
Travel Y-axis | 812 mm |
Travel Z-axis | 762 mm |
Spindle speed | 0 - 10000 /min. |
Number of driven axes | 3 |
Cooling through spindle | |
Spindle taper | CAT 40 . |
Machine dimensions l x w x h | 4115 x 2640 x 3170 mm |
Machine weight | 7 700 kg |
YOM: | 2021 |
Control system | YES |
Control system Heidenhain | TNC 640 |
Clamping area of table | 1420 x 500 mm |
Travel X-axis | 1270 mm |
Travel Y-axis | 520 mm |
Travel Z-axis | 610 mm |
Spindle speed | 1 - 12000 /min. |
Number of driven axes | 3 |
Cooling through spindle | YES |
Pressure of cooling | 20 bar |
Spindle taper | ISO 50 . |
Tool magazine | YES |
Number of positions in magazine | 40 |