icon-phone +420 778 547 838
EN
Grinding machines / Cylindrical / S 40-3

Grinding machines / Cylindrical / S 40-3

  • Inventory number 182080
  • Machine type S 40-3
  • Producer Studer
  • YOM 1989
Max. diameter of grinding125 mm
Max. length of grinding400 mm
Max. weight of workpiece100 kg
Device for internal grindingNO

Subject to change of technical parameters.


Description

Stored in stock, not under power.
Almost unused- just start up, 72-hours test, and 3 months in operation.

There are approximately 50 machines only produced from this type.
Machine body made from Granitone.
Equipped with loading system and Robot- MANIGLEY Sutz Automation, Switzerland.
Suitable for automotive industry.

CNC system- GROSSENBACHER, typ FMS 5 (Switzerland)

Longitudinal slide:

Max. travel centre distance +50 mm

Min. automatic travel 0.5 mm

Speed vt 50-5500 mm/min

Reversal dwell (programmable) 0-99.9 s

Max. swivel of table 12 degrees

Wheelhead slide:

Max. Travel (programmable) 300 mm

3 infeed speeds (programmables) 0,06-3000 mm/min

Automatic feed.

Resolution 0,0001 mm

Wheelhead left:

Grinding wheel dia./width/bore- 500/80/203 mm

Power requirement 7.5 kW

Spindle speeds 1910/2170/2460/2800 rpm

Automatic dressing.

Workhead:

Swivel range 0-90 degrees

Fitting taper Morse 5

Collets W-25

Max. workpiece weight between centers 100 kg

Tailstock:

Fitting taper Morse 3

Quill travel 30 mm

Accuracy:

Surface straightness better than DIN 8630

Roundness on live spindle grinding 0.0004

Similar machines

BHM 50/2000 CNC
YOM: 2019
Control systemYES
Control system SiemensSinumerik 828 D
Max. diameter of grinding500 mm
Max. length of grinding2000 mm
Max. weight of workpiece1000 kg
Device for internal grindingYES
Main motor power11 kW
Machine dimensions l x w x h7700x2500x2200 mm
Machine weight8900 kg

BHM 50/2000 CNC
Fermat
Inventory number: 171365

BUC E 63/3000 CNC
YOM: 2019
Max. diameter of grinding630 mm
Max. length of grinding3000 mm
Max. weight of workpiece3000 kg
Control systemYES
Control system SiemensSinumerik 828 D - 802 D si - Sinumerik 828 D - 802 D si
Device for internal grindingYES
Main motor power18,5 kW
Machine dimensions l x w x h10600 x 4350 x 2550 mm
Machine weight16000 kg

BUC E 63/3000 CNC
Fermat
Inventory number: 093068

BUA 25A/750 NC
YOM: 0
Control systemNO
Max. diameter of grinding250 mm
Max. length of grinding750 mm
Max. weight of workpiece250 kg
Device for internal grindingYES
Distance between centres750 mm
Machine dimensions l x w x h4000 x 2800 x 2200 mm
Machine weight3000 kg
Max. diameter grinding wheel250 mm

BUA 25A/750 NC
Cetos
Inventory number: 182068

BUB E 50/2000 CNC
YOM: 2019
Control systemYES
Control system B & R
Max. diameter of grinding500 mm
Max. length of grinding2000 mm
Max. weight of workpiece500 kg
Device for internal grindingYES
Main motor power11 kW
Machine dimensions l x w x h7700 x 2500 x 2200 mm
Machine weight8900 kg

BUB E 50/2000 CNC
Fermat
Inventory number: 093070

BHCR 85/4000 CNC
YOM: 2019
Control systemYES
Control system SiemensSinumerik 840 D
Max. diameter of grinding850 mm
Max. length of grinding4000 mm
Max. weight of workpiece4000 kg
Device for internal grindingYES
Main motor power18,5 kW
Machine dimensions l x w x h13000x4350x2550 mm
Machine weight21000 kg

BHCR 85/4000 CNC
Fermat
Inventory number: 171363