Control system Heidenhain | TNC 640 |
Diameter of working spindle | 5.2 in |
Travel X-axis | 140 in |
Travel Y-axis | 80 in |
Spindle speed | 10 - 3000 /min. |
Cooling through spindle | YES |
Pressure of cooling | 20 bar |
Spindle travel - W axis | 29.2 in |
Travel Z-axis | 50 in |
Tool magazine | NO |
Spindle taper | ISO 50 . |
Clamping area of table | 72 x 64 in |
Max. weight of workpiece | 12000 kg |
Main motor power | 41 kW |
Machine dimensions l x w x h | 288 x 304 x 196 in |
Machine weight | 35000 kg |
Total input | 80 kVA |
Subject to change of technical parameters.
The machine is complete overhauled and modernized. The machine has a modern headstock 3000 rev./minute and a new X bed, slides and table – headstock, X bed, slides and table are made by Fermat.
After the overhaul the machine will be controlled in all X,Y,Z,B axes continuously and will comply with all requirements of CNC controlled machine with the possibility of circular interpolation, screw interpolation, spatial interpolation – curve in a space and linear interpolation in 4 axes.
Geometric protocol, warranty, CE confirmation, operating instructions and all necessary documents.
The exact content of the overhaul will be precisely specified in the sales contract.
YOM: | 2004 |
Control system | NO |
Diameter of working spindle | 100 mm |
Travel X-axis | 1600 mm |
Travel Y-axis | 1120 mm |
Spindle speed | 0 - 1120 /min. |
Cooling through spindle | NO |
Spindle travel - W axis | 900 mm |
Travel Z-axis | 1250 mm |
Tool magazine | NO |
Spindle taper | ISO 50 . |
Clamping area of table | 1250 x 1250 mm |
Main motor power | 10 kW |
Machine dimensions l x w x h | 6015 x 3000 x 3000 mm |
Machine weight | 17500 kg |
YOM: | 0 |
Control system | NO |
Diameter of working spindle | 100 mm |
Travel X-axis | 1600 mm |
Travel Y-axis | 1120 mm |
Spindle speed | 7 - 1120 /min. |
Cooling through spindle | NO |
Spindle travel - W axis | 900 mm |
Travel Z-axis | 1250 mm |
Tool magazine | NO |
Spindle taper | ISO 50 . |
Max. load of table | 3000 kg |
Machine dimensions l x w x h | 6710 x 3450 x 3000 mm |
Machine weight | 14000 kg |
Main motor power | 11 kW |
Total input | 17 kVA |
Clamping area of table | 1250 x 1250 mm |
Face plate diameter | 600 mm |
Max. diameter of face turning | 900 mm |
YOM: | 0 |
Control system | NO |
Diameter of working spindle | 100 mm |
Travel X-axis | 1600 mm |
Travel Y-axis | 1120 mm |
Spindle speed | 0 - 1120 /min. |
Cooling through spindle | NO |
Spindle travel - W axis | 900 mm |
Travel Z-axis | 1250 mm |
Tool magazine | NO |
Spindle taper | ISO 50 . |
Clamping area of table | 1250 x 1250 mm |
Main motor power | 11 kW |
Max. weight of workpiece | 3000 kg |
Total input | 15 kVA |
Machine dimensions l x w x h | 6710 x 3450 x 3000 mm |
Machine weight | 14000 kg |
YOM: | 1990 |
Control system | NO |
Diameter of working spindle | 100 mm |
Travel X-axis | 1600 mm |
Travel Y-axis | 1120 mm |
Spindle speed | 0 - 1120 /min. |
Cooling through spindle | NO |
Spindle travel - W axis | 900 mm |
Travel Z-axis | 1250 mm |
Tool magazine | NO |
Spindle taper | ISO 50 . |
Clamping area of table | 1250 x 1250 mm |
Main motor power | 11 kW |
Max. weight of workpiece | 3000 kg |
Total input | 15 kVA |
Machine dimensions l x w x h | 6710 x 3450 x 3000 mm |
Machine weight | 14000 kg |
YOM: | 2000 |
Control system | YES |
Control system Heidenhain | TNC 426 |
Diameter of working spindle | 130 mm |
Travel X-axis | 3500 mm |
Travel Y-axis | 2500 mm |
Spindle speed | 10 - 2500 /min. |
Cooling through spindle | NO |
Spindle travel - W axis | 800 mm |
Travel Z-axis | 1250 mm |
Tool magazine | NO |
Spindle taper | ISO 50 . |
Max. weight of workpiece | 12000 kg |
Clamping area of table | 1800x2200 mm |