Description

The machine is in the process of general overhaul. The machine will be available in 04/2023
Description of general overhaul:
Hand-controlling horizontal borer machine with fixed stand and cross-adjustable table. The machine is in the following version: X, Z, Y ground, traverse milled and undercut, more precisely glued with special material with sliding properties (Turcite, GS-super fluid, etc.), wedges ground and scraped. The worktable surface is grinded and scraped (reinovation of grooves as required). The X and Y axes are equipped with trapezoidal screws with nuts - placed in bearing housings. Headstock - Gearwheel bearings from reputable manufacturers, main place as well as main spindle manufacturing by Fermat, hydraulic tool clamping. Automatic lubrication is controlled centrally through the dispensers - the manufacturer Hytos. The machine has a telescopic covering of X- and Z axes. Machine surface adjustment - varnish according to RAL 5010 (blue – depending on customer´s wish). Electrical switchboard with programmable controller, control panel on headstock. CE cable lines are installed throughout the machine and between the machine and the electrical cabinets. The machine is equipped with digital measuring with linear rulers with accuracy of positioning indication 0.01mm for axes (X, Y, Z, W) including measuring of the round table by rotary sensor (in the center of the table). Optical reading of the angle after complete overhaul.

Technical parameters:
Producer ..... TOS Varnsdorf
Year manufacture/Year overhaul ..... - / 2023

Diameter of working spindle ..... 100 mm
Travel X-axis ..... 1600 mm
Travel Y-axis ..... 1120 mm
Spindle speed ..... 7 - 1120 /min.
Spindle travel - W axis ..... 900 mm
Travel Z-axis ..... 1250 mm
Spindle taper ..... ISO 50 .
Max. load of table ..... 3000 kg
Machine dimensions l x w x h ..... 6710 x 3450 x 3000 mm
Machine weight ..... 14000 kg
Main motor power ..... 11 kW
Total input ..... 17 kVA
Clamping area of table ..... 1250 x 1250 mm
Face plate diameter ..... 600 mm
Max. diameter of face turning ..... 900 mm


Technical parameters

Control system Digital Measuring
Diameter of working spindle 100 mm
Travel X-axis 1600 mm
Travel Y-axis 1120 mm
Spindle speed 7 - 1120 /min.
Spindle travel - W axis 900 mm
Cooling through spindle No
Tool magazine No
Spindle taper ISO 50
Travel Z-axis 1250 mm
Max. load of table 3000 kg
Machine dimensions l x w x h 6710 x 3450 x 3000 mm
Machine weight 14000 kg
Main motor power 17 kVA
Clamping area of table 1250 x 1250 mm
Face plate diameter 600 mm
Max. diameter of face turning 900 mm

TOS Varnsdorf

Dismantling Included
Loading Included
Inspection times By appointment
Country: Czech Republic
City: Lipník
Postcode: 751 31
Street: Loučská 503

Starting in

2023-02-01 04:00:00

Machine is certified

certification-stamp

  • Verified commerical sellers
  • Strict certification process
  • 100% Guarantee

Do you have any questions?

Click below and your local sales representative will contact you shortly