# Fermat Machinery > Heavy-duty horizontal boring and milling machines. 30+ years of engineering excellence. ## About [About FERMAT](https://www.fermatmachinery.com/about) — Fermat Machinery is a Czech manufacturer of heavy-duty horizontal boring and milling machines, founded in Prague in 1990 by Jiří Ferenc and headquartered in Brno since 2000. The FERMAT group has 445 employees, not counting agency staff (as of November 2026). It also uses agency staff as operations require. The group runs seven plants in the Czech Republic and six branches worldwide, produces over 100 machines a year and exports to more than 40 countries. Its oldest member, Lucas Precision of Cleveland, has been building boring mills since 1901. FERMAT serves aerospace, energy, railways, heavy industry, oil & gas, shipbuilding, and general engineering. Machines are built in-house with a focus on precision, durability, and custom engineering for large and complex workpieces — rotary tables handle workpieces up to 100 tonnes and 10 metres in height. ## FERMAT Group in figures - [Financial results](https://www.fermatmachinery.com/about/financial-results) - [Group companies](https://www.fermatmachinery.com/about/group-companies) - [Investments and awards](https://www.fermatmachinery.com/about/investments-and-awards) - [Markdown · EN](https://www.fermatmachinery.com/documents/fermat-group/fermat-group-en.md) - [JSON](https://www.fermatmachinery.com/documents/fermat-group/financial-data.json) ## Careers [Careers](https://www.fermatmachinery.com/career) — open positions at FERMAT Machinery. We hire engineers, CNC specialists, service technicians and commercial roles. Czech-based employer headquartered in Brno, building machine tools since 1990. ## Research & Development [Research & Development](https://www.fermatmachinery.com/research-development) — FERMAT invests in applied research and smart-manufacturing technologies co-financed by the European Union under OP PIK, OP TAK and OP Zaměstnanost. Active subsidy programmes, EU-funded innovation projects, and long-term partnerships with Czech universities and research institutes. Active EU-funded projects: R&D of special boring mills I & II, high-speed headstock with integrated C-axis, rotary pallet changer and robotic tool exchange. University partners: Brno University of Technology, Czech Technical University Prague, Palacký University Olomouc. ## Machine Categories - [All Machines](https://www.fermatmachinery.com/machines) — full catalogue across every category - [Horizontal Table-Type Machines](https://www.fermatmachinery.com/machines/category/horizontal-table-type) — 5 models. Table-type boring & milling machines with cross-wise table movement, designed for machining of small and medium-size workpieces of up to 50 tons. Lead time: 4–12 weeks from stock, 6–8 months built to order. - [Horizontal Floor-Type Machines](https://www.fermatmachinery.com/machines/category/horizontal-floor-type) — 3 models. Horizontal floor-type boring & milling machines with cross-wise travel of column, designed for machining of workpieces of up to 100 tons. Lead time: 8–10 months built to order; 12–14 months for WRF HEAVY. Not built for stock. - [Gantry & Bridge-Type Machines](https://www.fermatmachinery.com/machines/category/gantry-bridge-type) — 4 models. Gantry / bridge-type machines with movable columns or table, and with a wide range of optional accessories. Lead time: 10–12 months built to order (FG, FP); 12–14 months for GANTRY HEAVY and GANTRY HEAVY-DUTY. ## Featured Machines - [FG](https://www.fermatmachinery.com/machines/fg) - [FP](https://www.fermatmachinery.com/machines/fp) - [GANTRY HEAVY](https://www.fermatmachinery.com/machines/gantry-heavy) - [GANTRY HEAVY-DUTY](https://www.fermatmachinery.com/machines/gantry-heavy-duty) - [WF 13/15 R (L)](https://www.fermatmachinery.com/machines/wf-13-15-r) - [WFC 10/11 (L)](https://www.fermatmachinery.com/machines/wfc-10-11) - [WFT 10/11 (L)](https://www.fermatmachinery.com/machines/wft-10-11) - [WFT 13/15 (R,L)](https://www.fermatmachinery.com/machines/wft-13-15) - [WPT 10/11](https://www.fermatmachinery.com/machines/wpt-10) - [WPT 13/15](https://www.fermatmachinery.com/machines/wpt-13-15) - [WRF 130/150/160/180/MILL](https://www.fermatmachinery.com/machines/wrf-130-150-160-180-mill) - [WRF HEAVY](https://www.fermatmachinery.com/machines/wrf-heavy) ## Services - [All Services](https://www.fermatmachinery.com/services) — service overview, lifecycle support and FAQs - [Application Support](https://www.fermatmachinery.com/services/application-support) — Training, control system options, diagnostics and equipment — everything the FERMAT application engineer brings after the machine is… - [Operator Training](https://www.fermatmachinery.com/services/category/training#svc-operator-training) — Three to five days at your machine, in your configuration, for operators taking the machine over or joining it. - [Programming Training](https://www.fermatmachinery.com/services/category/training#svc-programming-training) — For people who already run the machine and want more out of it, including the functions most operators never discover. - [Advanced Programming](https://www.fermatmachinery.com/services/category/training#svc-advanced-programming-training) — The shortest and densest of our courses, for people who already program and need the rest of the control opened up. - [Custom Training](https://www.fermatmachinery.com/services/category/training#svc-custom-training) — Sometimes a whole course is not what is missing — one software option nobody can use is. - [Service & Maintenance](https://www.fermatmachinery.com/services/maintenance) — Helpline support, regular check-ups and maintenance — including specialised servicing of angle heads. - [3D Machine Model](https://www.fermatmachinery.com/services/category/software#svc-3d-machine-model) — A 3D model built to your machine’s actual specification — the basis for a CAM simulation that shows the machine, not just the toolpath. - [3D Calibration Set](https://www.fermatmachinery.com/services/category/software#svc-3d-calibration-set) — Your own crew measures the kinematics with a sphere and writes the corrections back, so five-axis positioning holds its accuracy. - [Machine Network Connection](https://www.fermatmachinery.com/services/category/software#svc-machine-network-connection) — Without a network connection the machine is an island: programs travel on a memory stick and no data ever leaves the shop floor. - [Batch Process Manager](https://www.fermatmachinery.com/services/category/software#svc-batch-process-manager) — The control tracks which part is finished, which is being cut and what follows, and checks the tools, program and datum for the next step. - [Collision Monitoring (DCM)](https://www.fermatmachinery.com/services/category/software#svc-collision-monitoring-dcm) — Dynamic collision monitoring works from a 3D model of the machine held in the control, and covers manual jogging, where most collisions… - [Turning Option](https://www.fermatmachinery.com/services/category/software#svc-turning-option) — A rotational part no longer has to travel to another machine: turning and milling in one clamping, so re-fixturing error and handling time… - [CAD Import](https://www.fermatmachinery.com/services/category/software#svc-cad-import) — Removes the most common source of programming error at the machine: a mistyped coordinate copied off a paper drawing. - [Energy Saving](https://www.fermatmachinery.com/services/category/software#svc-energy-saving) — A software option that shuts down consumers the machine does not currently need — the longer the idle periods, the more it shows on the… - [Programming Station](https://www.fermatmachinery.com/services/category/software#svc-programming-station) — The same control and the same behaviour as your machine, on a desktop: programs are written, debugged and proven while the machine keeps… - [CAM Software](https://www.fermatmachinery.com/services/category/software#svc-cam-software) — GibbsCAM, TopSolid or ESPRIT — we recommend one based on your parts and your engineering department, and make sure it handles your machines. - [Spare Parts](https://www.fermatmachinery.com/services/spare-parts) — Genuine FERMAT spare parts delivered fast, so downtime stays short. - [Machine Quick-Check](https://www.fermatmachinery.com/services/category/diagnostics#svc-machine-quick-check) — Five-hour check combining spindle vibration diagnostics and a ball bar test, with compensations set and a protocol you can file. - [NC Verification — CHECKitB4](https://www.fermatmachinery.com/services/category/software#svc-nc-verification-checkitb4) — Not an approximate simulation: a real control (SINUMERIK, HEIDENHAIN, FANUC) running on a PC against a model of your machine. - [Interpolation Check](https://www.fermatmachinery.com/services/category/diagnostics#svc-interpolation-check) — The full survey of machine geometry and motion accuracy — laser interferometer and ball bar, compensations set, PDF protocol to VDI or ISO. - [Production Monitoring — StateMonitor](https://www.fermatmachinery.com/services/category/software#svc-production-monitoring) — Live data from machines of any make and any control: which machine is producing, which is waiting and which is stopped. - [Geometry Check](https://www.fermatmachinery.com/services/category/diagnostics#svc-geometry-check) — Geometric accuracy measured and adjusted to ISO 230-1, ISO 10791-1 and ISO 3070-3 — the service corrects, it does not only report. - [Angular Plates & Cubes](https://www.fermatmachinery.com/services/category/equipment#svc-angular-plates-and-cubes) — The basic clamping elements for large machines, with flatness to DIN 876 grade 2 and squareness held to 0.05/1000 mm. - [Zero Point Unit Pallet](https://www.fermatmachinery.com/services/category/equipment#svc-zero-point-unit-pallet) — Modular pallet system that retrofits to an older machine too, giving quick partial automation without replacing it. - [Custom Pallets](https://www.fermatmachinery.com/services/category/equipment#svc-custom-pallets) — When a standard pallet does not match the shape of the part or the layout of the machine, we design and make one that does. - [FERMAT Modular Vices](https://www.fermatmachinery.com/services/category/equipment#svc-fermat-modular-vices) — Proved on heavy parts in our own production rather than derived from a catalogue: stationary and sliding units combined along a rail to… - [Tooling Package for Your Part](https://www.fermatmachinery.com/services/category/equipment#svc-tooling-package) — Tooling is the fastest way to get more out of an existing machine — and the place where most is wasted. - [Start-up Package](https://www.fermatmachinery.com/services/category/equipment#svc-start-up-package) — Prepared alongside the machine delivery, matched to the parts you will make and to the machine’s configuration. - [Tool Setter — Renishaw RTS](https://www.fermatmachinery.com/services/category/equipment#svc-tool-setter-renishaw-rts) — Catches the broken tool that would otherwise end in a scrapped part or a damaged machine. Retrofitted to machines already running. - [External Tool Presetters](https://www.fermatmachinery.com/services/category/equipment#svc-external-tool-presetters) — Two levels: a robust digital presetter for diameter and length, or an optical one with a camera for edge inspection. - [Workpiece Probe — Renishaw RMP](https://www.fermatmachinery.com/services/category/equipment#svc-workpiece-probe-renishaw-rmp) — A radio probe sets the part and rotates the coordinate system automatically, so the part is set by the probe instead of by hand. - [Rebuilding & Retrofit](https://www.fermatmachinery.com/services/retrofit) — Overhaul, CNC retrofit or a new headstock for heavy horizontal boring mills, lathes and vertical turning lathes. - [Co-operative Machining](https://www.fermatmachinery.com/services/cooperative-machining) — FERMAT in-house manufacturing: machining, assembly, testing and quality control - [Used Machines](https://www.fermatmachinery.com/used-machines/) — FERMAT's used-machine department: more than 1,000 machines on offer, from shears to the most complex CNC machines; FERMAT also buys machines, and its speciality is taking an old boring mill or cylindrical grinder in exchange for a brand-new FERMAT - [Grinding Machines](https://www.fermatmachinetool.com/en/home) — cylindrical grinders and related accessories from FERMAT Machine Tool, the FERMAT Group member that grew out of ZEVO Prague (acquired 2008) ## Accessories [All accessories](https://www.fermatmachinery.com/accessories) — milling heads (angle, facing, straight; automatic and manual), rotary tables, tooling and automation. Accessories have no separate page: each link below opens that accessory's detail window with its description and full parameter table. ### Angle Heads & Facing Heads - [Automatic C-axis 0.001°](https://www.fermatmachinery.com/accessories#acc-automatic-c-axis) — Manual heads are typically positioned manually, after screws that keep the head in position, are released. - [Cogsdill ZX Facing & Contouring Head](https://www.fermatmachinery.com/accessories#acc-cogsdill-zx) — Facing and contouring head with a single tool slide that accepts a range of top tooling. External turning, grooving, taper boring, radius forming, chamfering, recessing and threading are all finished… - [D'Andrea UT](https://www.fermatmachinery.com/accessories#acc-dandrea-facing-head) — D'Andrea UT is a CNC facing head that connects to the machine's U-axis for automatic, program-controlled facing, boring, reaming and threading, interpolating with the other machine axes for concave… - [FH 65 Semi-automatic facing head](https://www.fermatmachinery.com/accessories#acc-fh-65-80) — Semi-automatic facing head. Manual connection to the headstock, automatic positioning and manual lubrication. - [OHM Orthogonal Manual Milling Head](https://www.fermatmachinery.com/accessories#acc-ohm-20) — OHM 20 is FERMAT's two-axis orthogonal manual milling head, manually attached to the headstock like the UHM 20 and PHM 20 on the same spindle taper (SK 50) and maximum speed (2000 rpm). Where the UHM… - [OMG TA26_T](https://www.fermatmachinery.com/accessories#acc-omg-ta26-t) — Right-angle manual angle head with extension options. Manual attachment to the headstock, manual positioning and manual tool clamping / unclamping. - [PHA Right Angle Automatic Milling Head](https://www.fermatmachinery.com/accessories#acc-pha-angle-head) — Right angle automatic milling head. Fully automatic — attachment to the headstock, tool clamping, positioning and lubrication. - [PHM Right Angular Milling Head](https://www.fermatmachinery.com/accessories#acc-phm-angle-head) — Manual right-angular milling head. Positioned and clamped by hand; available in two sizes. - [UHA Universal Milling Head](https://www.fermatmachinery.com/accessories#acc-uha-angle-head) — Universal Automatic Milling Head. Fully automatic — attachment to the headstock, tool clamping, positioning and lubrication. Available with 1°, 2,5° or 0,001° (micro-indexing) indexing. - [UHAmi Servodrive](https://www.fermatmachinery.com/accessories#acc-uhami-servodrive) — Universal automatic milling head with servo drive, in two versions: SD with micro-indexed positioning by one servomotor per axis, and SDHS (High-Speed) up to 5000 rpm. - [UHM Universal Milling Head](https://www.fermatmachinery.com/accessories#acc-uhm-angle-head) — Two-axis universal manual milling head, manually attached to the headstock. Available in two sizes — UHM 20 (manual tool clamping) and UHM 30 (hydraulic tool clamping). Outside coolant standard. ### Automatic Changing Systems - [2-position PICK-UP](https://www.fermatmachinery.com/accessories#acc-pickup-2-position) — 2 - position PICK-UP is used for automatic exchange of milling heads with automatic clamping on headstock. - [2/3/4-position PICK-UP](https://www.fermatmachinery.com/accessories#acc-pickup-2-3-4-position) — The 2/3/4-position PICK-UP is FERMAT's automatic head-exchange station for floor-type machines, mounted directly to the floor plate rather than the table. - [ATC 20/32/40/60/90/120](https://www.fermatmachinery.com/accessories#acc-atc-20-32-40-60-90-120) — ATC – automatic tool changer is one of the possibilities of how to automatically change tools into spindle on FERMAT machines. The ATC can store 20/32/40/60/90/120 tools in the magazine. - [KUKA Robot](https://www.fermatmachinery.com/accessories#acc-kuka-robot-96-125-189) — Robotic Tool Changer enables fast and safe automatic tool exchange to the spindle or directly into any position of the automatic milling head. - [Table side PICK UP](https://www.fermatmachinery.com/accessories#acc-table-side-pick-up) — PICK-UP is used for automatic exchange of milling heads with automatic clamping on headstock. Suitable for table-type machines for tables 1600x1800 mm and bigger. • The head holder consists of two… ### Automatization - [Cross-wise Pallet Changer](https://www.fermatmachinery.com/accessories#acc-cross-wise-pallet-changer) — Two pallets sit perpendicular to the X axis, each on its own bed, and are exchanged automatically. As with any automatic pallet changer, machining continues on one pallet while the other is cleaned… - [Shuttle Pallet Changer](https://www.fermatmachinery.com/accessories#acc-shuttle-pallet-changer) — Two tables sit on one bed along the X axis and swap places automatically. One part is being cut while the other table is cleared, cleaned and set up with the next workpiece, so the spindle is not… - [ZPS - Zero point clamping system](https://www.fermatmachinery.com/accessories#acc-zps-zero-point-clamping-system) — A pallet clamping system that works from a zero point: modules built into the table take a pin on the pallet, so a fixture or workpiece returns to exactly the same position every time it is put back… ### Rotary Tables - [Floor Plates](https://www.fermatmachinery.com/accessories#acc-floor-plates) — Floor plates are the bolted-down working surface a floor-type or gantry machine works over: the workpiece is set down on the plate beside the machine and clamped there, instead of being lifted onto a… - [Rotary Table T10](https://www.fermatmachinery.com/accessories#acc-rotary-table-t10) — All the tables have outstanding positioning precision (4 arc sec. 0.010 mm / 1000 mm radius). There is no slip-stick during the positioning of the table. - [Rotary Table T20](https://www.fermatmachinery.com/accessories#acc-rotary-table-t20) — All the tables have outstanding positioning precision (4 arc sec. 0.010 mm / 1000 mm radius). There is no slip-stick during the positioning of the table. - [Rotary Table T25/50](https://www.fermatmachinery.com/accessories#acc-rotary-table-t25-50) — T25/50 is FERMAT's mid-size rotary table, built on the same cross roller bearing and rotary encoder as the rest of the range, holding 4 arc second positioning accuracy (0.010 mm per 1000 mm radius)… - [Rotary Table T60](https://www.fermatmachinery.com/accessories#acc-rotary-table-t60) — All the tables have outstanding positioning precision (4 arc sec. 0.010 mm / 1000 mm radius). There is no slip-stick during the positioning of the table. - [Rotary Table T80/100](https://www.fermatmachinery.com/accessories#acc-rotary-table-t80-100) — T80/100 is FERMAT's largest rotary table, built on the same cross roller bearing and rotary encoder as the rest of the range, holding 4 arc second positioning accuracy (0.010 mm per 1000 mm radius)… - [Tilting Table TT 60/80](https://www.fermatmachinery.com/accessories#acc-tilting-table-tt-60-80) — TT 60/80 is the only table in FERMAT's range with a tilting axis, adding 0° to 10° of tilt to the standard build: cross roller bearing, rotary encoder, 0.001° positioning increments and continuous… ## Technologies & Software [Technology overview](https://www.fermatmachinery.com/technology) — smart machine technologies, CNC controls and FERMAT software. See also [Control systems](https://www.fermatmachinery.com/control-systems) (side-by-side comparison of all 4 CNC control platforms), [Multitasking](https://www.fermatmachinery.com/multitasking) (milling, boring and turning on one machine) and [Automation](https://www.fermatmachinery.com/automation) (zero-point clamping, pallet changers, automatic tool exchange, unattended production). ### Multitasking - [Turning Table](https://www.fermatmachinery.com/technology/turning-table) — Rotary table rated for turning operations — turn large flanges and rings on the boring mill, no second machine needed. - [Interpolation Turning](https://www.fermatmachinery.com/technology/interpolation-turning) — The spindle interpolates X and Y axes in a circular path to turn features anywhere on the workpiece — without rotating the part. - [Facing Head Turning](https://www.fermatmachinery.com/technology/facing-head-turning) — A facing head with CNC U-axis turns external and internal diameters, faces and tapers — contour turning directly from the spindle. ### Smart Technologies - [3D Kinematic Calibration](https://www.fermatmachinery.com/technology/3d-kinematic-calibration) — Measure and correct the machine's kinematic transformation — restores accuracy to the rotary axes without waiting for service. - [Vibration Monitoring](https://www.fermatmachinery.com/technology/vibration-monitoring) — Sensors on the spindle and ram watch vibration levels in real time — protecting the machine, the tool and the surface finish. - [Adaptive Feed Control](https://www.fermatmachinery.com/technology/adaptive-feed-control) — The CNC adjusts feed rate in real time based on spindle load — shorter cycle times in light cuts, tool protection in heavy ones. - [Machine Collision Monitoring](https://www.fermatmachinery.com/technology/machine-collision-monitoring) — The control knows the shape of the machine and stops it before it hits itself — in automatic mode and while jogging by hand. - [Spindle Temperature Compensation](https://www.fermatmachinery.com/technology/spindle-temperature-compensation) — Thermal sensors track spindle growth and the CNC compensates automatically — stable accuracy from the first part of the shift to the last. ### Control systems - [EASYCRAFT](https://www.fermatmachinery.com/technology/easy-craft) — FERMAT's own conversational control — guided workshop programming of boring and milling cycles without G-code. Channels: 1 · Display: 21.5″ · Dialog: Graphical, no ISO. Best for: Shop-floor programming, fast onboarding. - [FANUC](https://www.fermatmachinery.com/technology/fermat-fanuc) — Robust FANUC CNC in three tiers — FERMAT FANUC, 30i-B Plus and 31i-B Plus — for maximum reliability and worldwide service. Axes: 11–48 · Channels: 2–10 · Display: 21.5–24″ · Dialog: iHMI / G-code · Continuous 5-axis: Option. Best for: Maximum reliability, worldwide service. - [HEIDENHAIN](https://www.fermatmachinery.com/technology/heidenhain-640) — Premium HEIDENHAIN Klartext controls — TNC 640, TNC7 and TNC7 Basic — for die & mould and high-precision contouring. Axes: 8–24 · Channels: 1 · Display: 16–24″ · Dialog: Klartext + ISO · Continuous 5-axis: Std. Best for: Die & mould, high-precision contouring. - [SIEMENS SINUMERIK ONE](https://www.fermatmachinery.com/technology/siemens-one) — The digital-native SINUMERIK ONE — top-end Siemens platform with digital-twin capability. Axes: up to 31 · Channels: 10 · Display: 19″ · Dialog: ShopMill/Turn + ISO · Continuous 5-axis: Std. Best for: Digital twin, future-proof high-end. ## Fast Delivery Machines [Fast Delivery Machines](https://www.fermatmachinery.com/fast-delivery-machines) — three categories of machines available for quicker shipment than a machine built to order: - New stock: factory-fresh machines built in advance, configurable on delivery, 4–12 week shipment - Rebuilt: older units fully refurbished and retrofitted with modern CNC, 12-month warranty - Used: second-hand machines sold AS-IS, optional warranty on selected units ## Events & Exhibitions [Events & Exhibitions](https://www.fermatmachinery.com/events) — the trade fairs and exhibitions FERMAT Machinery takes part in, with dates and location. The page is empty when none is listed. ## Customer References - [All References](https://www.fermatmachinery.com/references) — customer stories, each with video - [Bender & Hesse](https://www.fermatmachinery.com/references/bender-hesse) (Germany) · General Machining — Bender & Hesse using FERMAT WFC 10/11 (L) for their jobshops operations in Germany. - [Doosan Bobcat](https://www.fermatmachinery.com/references/doosan-bobcat) (Czech Republic) · Construction & Equipment — Doosan Bobcat's Dobříš campus in the Czech Republic — the EMEA manufacturing hub for Bobcat loaders and compact excavators — features FERMAT machining in its… - [ELZAM-ZAMECH Sp. z o.o.](https://www.fermatmachinery.com/references/elzam-zamech-sp-z-o-o) (Poland) · Construction & Equipment — ELZAM-ZAMECH Sp. z o.o. using FERMAT WRF 130/150/160/180 for their construction and equipment operations in Poland. - [Lakics Gépgyártó Kft.](https://www.fermatmachinery.com/references/lakics-gepgyarto-kft) (Hungary) · Energy & Power — Lakics Gépgyártó Kft. using FERMAT WFT 13/15 (R,L) for their energy and power operations in Hungary. - [MG srl](https://www.fermatmachinery.com/references/mg-srl) (Italy) · Machine Tools — MG srl, a leading European maker of plate-roll and section-bending machines, chose a FERMAT WFT 11 to machine frames, bearing supports and bases for its… - [Officina Zucchinali s.r.l.](https://www.fermatmachinery.com/references/officina-zucchinali-s-r-l) (Italy) · General Machining — Officina Zucchinali s.r.l. using FERMAT WFT 13/15 (R,L) for their jobshops operations in Italy. - [Patentus S.A.](https://www.fermatmachinery.com/references/patentus-s-a) (Poland) · General Machining — Patentus S.A. using FERMAT WFT 13/15 (R,L) for their jobshops operations in Poland. - [TIE Services International](https://www.fermatmachinery.com/references/tie-services-international) (Romania) · Energy & Power — TIE Services International using FERMAT WFT 10/11 (L) for their energy and power operations in Romania. - [Wimmer](https://www.fermatmachinery.com/references/wimmer) (Austria) · Construction & Equipment — Austrian family manufacturer Wimmer produces heavy-duty attachments for hydraulic and tunnel excavators, relying on FERMAT boring and milling for its steel… - [YSAKO Oy](https://www.fermatmachinery.com/references/ysako) (Finland) · General Machining — Finnish contract-machining specialist YSAKO Oy invested in a FERMAT WFT 13 CNC boring mill to grow its mid-range batch machining capacity. ## Latest News - [All News](https://www.fermatmachinery.com/news) - [Introducing our new reference video](https://www.fermatmachinery.com/news/introducing-our-new-video-series) (2022-03-31) [news] - [We exchanged Brno for Nuremberg](https://www.fermatmachinery.com/news/we-exchanged-brno-nuremberg) (2021-11-01) [event] - [FERMAT machines in the virtual world](https://www.fermatmachinery.com/news/fermat-machines-virtual-world) (2021-02-09) [news] - [U.S. - Czech Investment Forum & SelectUSA Seminar In Prague](https://www.fermatmachinery.com/news/us-czech-investment-forum-selectusa-seminar-prague) (2020-09-30) [event] - [SMS Group and their third FERMAT machine](https://www.fermatmachinery.com/news/sms-group-and-their-third-fermat-machine) (2020-09-21) [news] - [New Service Vehicle](https://www.fermatmachinery.com/news/new-service-vehicle) (2020-06-26) [news] - [DACH Team finally together again](https://www.fermatmachinery.com/news/dach-team-finally-together-again) (2020-06-14) [event] - [PDI in masks](https://www.fermatmachinery.com/news/pdi-masks) (2020-06-04) [news] - [PDI of machine WF 13R](https://www.fermatmachinery.com/news/pdi-of-machine-wf-13r) (2020-02-19) [news] - [New WFT 15R mill for our customer in Washington, US](https://www.fermatmachinery.com/news/new-wft-15r-mill-for-customer-in-washington-us) (2020-01-06) [news] ## Industries Served - [All Industries](https://www.fermatmachinery.com/industries) — sectors FERMAT machines serve - [General Machining](https://www.fermatmachinery.com/industries/general-machining) — Versatile machining capacity for custom manufacturing and contract machining operations. - [Aerospace](https://www.fermatmachinery.com/industries/aerospace) — Precision machining for aerostructures, jet engines, and landing gear components. - [Defense](https://www.fermatmachinery.com/industries/defense) — Heavy machining for combat-vehicle and tank chassis, turrets, launch-system carriers, rocket bodies and aircraft structures. - [Construction & Equipment](https://www.fermatmachinery.com/industries/construction-and-equipment) — Heavy components for construction machinery, mining equipment, and industrial systems. - [Energy & Power](https://www.fermatmachinery.com/industries/energy-and-power) — Critical parts for turbines, generators, power plants, and energy infrastructure. - [Railway](https://www.fermatmachinery.com/industries/railway) — Precision components for trains, locomotives, and heavy transport equipment. - [Machine Tools](https://www.fermatmachinery.com/industries/machine-tools) — Precision machining for machine-tool manufacturers and capital equipment producers. - [Naval](https://www.fermatmachinery.com/industries/naval) — Large-scale machining for marine vessels, propulsion systems, and shipbuilding. - [Moulds & Dies](https://www.fermatmachinery.com/industries/moulds-and-dies) — Precision tooling for stamping, forging, plastic, and metal forming operations. ## Frequently Asked Questions Q: What does the FERMAT application engineer actually do? A: Trains your operators and programmers on your own machine and the options it carries, hands over tooling and clamping equipment and shows how to use it, and carries out the diagnostic measurements. The training, equipment and diagnostics sections describe each of those in detail. ([Application Support](https://www.fermatmachinery.com/services/application-support#faq)) Q: We already own the machine. Can you still help us get more out of it? A: Yes — that is most of what this covers. Control system options add capability to a machine already in production, external programming moves the programming work off the machine so the spindle keeps cutting, and a diagnostic check shows whether the machine still holds the accuracy the work needs. ([Application Support](https://www.fermatmachinery.com/services/application-support#faq)) Q: Why train at our machine rather than at your factory? A: Because the machine you have is not the machine in the brochure. Training on your configuration means the operator learns the options you actually bought, on the parts you actually make, and can try everything on real geometry the same day. ([Operator Training](https://www.fermatmachinery.com/services/category/training#faq)) Q: How many people can attend? A: Up to four operators. Beyond that nobody gets enough time at the control, which is where the learning happens. ([Operator Training](https://www.fermatmachinery.com/services/category/training#faq)) Q: How do I reach FERMAT service support? A: Through our helpline — a direct line to FERMAT service specialists. ([Service & Maintenance](https://www.fermatmachinery.com/services/maintenance#faq)) Q: Does FERMAT service angle heads? A: Yes. We provide specialised maintenance of angle heads and accessories. ([Service & Maintenance](https://www.fermatmachinery.com/services/maintenance#faq)) Q: Why does five-axis accuracy drift at all? A: The control positions the rotary axes using a stored model of where those axes physically are. Bearings settle, thermal cycles move things fractionally, and the stored model gradually stops matching the machine. Nothing has broken — the description has just gone stale, and calibration refreshes it. ([3D Calibration Set](https://www.fermatmachinery.com/services/category/software#faq)) Q: Do we need FERMAT on site to run it? A: No, and that is the point. The set is operated by your own people after training, so calibration is something you can do before a demanding job instead of scheduling a service visit. ([3D Calibration Set](https://www.fermatmachinery.com/services/category/software#faq)) Q: Does it protect while jogging manually, or only in a program? A: Both — and manual jogging is the more important half. A program can be verified beforehand; an operator driving the machine by hand towards an unfamiliar fixture cannot. That is where most collisions happen. ([Collision Monitoring (DCM)](https://www.fermatmachinery.com/services/category/software#faq)) Q: What does the delivery actually include? A: Three things that only work together: the software option in the control, the 3D model of your specific machine, and the PLC setup. A FERMAT application engineer commissions it and trains your operators. ([Collision Monitoring (DCM)](https://www.fermatmachinery.com/services/category/software#faq)) ## Contact - Phone: +420 775 893 021 - Email: info@fermat.cz - Address: Tuřanka 104, 627 00 Brno-Slatina, Czech Republic - Website: https://www.fermatmachinery.com - Contact form: https://www.fermatmachinery.com/contact ## Languages - English (x-default): https://www.fermatmachinery.com/ - Čeština: https://www.fermatmachinery.com/cs/